--- /dev/null
+What: /sys/class/gpio/
+Date: July 2008
+KernelVersion: 2.6.27
+Contact: David Brownell <dbrownell@users.sourceforge.net>
+Description:
+
+ As a Kconfig option, individual GPIO signals may be accessed from
+ userspace. GPIOs are only made available to userspace by an explicit
+ "export" operation. If a given GPIO is not claimed for use by
+ kernel code, it may be exported by userspace (and unexported later).
+ Kernel code may export it for complete or partial access.
+
+ GPIOs are identified as they are inside the kernel, using integers in
+ the range 0..INT_MAX. See Documentation/gpio.txt for more information.
+
+ /sys/class/gpio
+ /export ... asks the kernel to export a GPIO to userspace
+ /unexport ... to return a GPIO to the kernel
+ /gpioN ... for each exported GPIO #N
+ /value ... always readable, writes fail for input GPIOs
+ /direction ... r/w as: in, out (default low); write: high, low
+ /gpiochipN ... for each gpiochip; #N is its first GPIO
+ /base ... (r/o) same as N
+ /label ... (r/o) descriptive, not necessarily unique
+ /ngpio ... (r/o) number of GPIOs; numbered N to N + (ngpio - 1)
+
There is an exception to the above. If hotplug functionality is used
to remove all the CPUs that are currently assigned to a cpuset,
-then the kernel will automatically update the cpus_allowed of all
-tasks attached to CPUs in that cpuset to allow all CPUs. When memory
-hotplug functionality for removing Memory Nodes is available, a
-similar exception is expected to apply there as well. In general,
-the kernel prefers to violate cpuset placement, over starving a task
-that has had all its allowed CPUs or Memory Nodes taken offline. User
-code should reconfigure cpusets to only refer to online CPUs and Memory
-Nodes when using hotplug to add or remove such resources.
+then all the tasks in that cpuset will be moved to the nearest ancestor
+with non-empty cpus. But the moving of some (or all) tasks might fail if
+cpuset is bound with another cgroup subsystem which has some restrictions
+on task attaching. In this failing case, those tasks will stay
+in the original cpuset, and the kernel will automatically update
+their cpus_allowed to allow all online CPUs. When memory hotplug
+functionality for removing Memory Nodes is available, a similar exception
+is expected to apply there as well. In general, the kernel prefers to
+violate cpuset placement, over starving a task that has had all
+its allowed CPUs or Memory Nodes taken offline.
There is a second exception to the above. GFP_ATOMIC requests are
kernel internal allocations that must be satisfied, immediately.
controlled by a kernel/module/sysfs/sysctl parameter.
Who: Krzysztof Piotr Oledzki <ole@ans.pl>
+---------------------------
+
+What: ide-scsi (BLK_DEV_IDESCSI)
+When: 2.6.29
+Why: The 2.6 kernel supports direct writing to ide CD drives, which
+ eliminates the need for ide-scsi. The new method is more
+ efficient in every way.
+Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
void (*kill_sb) (struct super_block *);
locking rules:
may block BKL
-get_sb yes yes
-kill_sb yes yes
+get_sb yes no
+kill_sb yes no
->get_sb() returns error or 0 with locked superblock attached to the vfsmount
(exclusive on ->s_umount).
unlocked_ioctl: no (see below)
compat_ioctl: no
mmap: no
-open: maybe (see below)
+open: no
flush: no
release: no
fsync: no (see below)
aio_fsync: no
-fasync: yes (see below)
+fasync: no
lock: yes
readv: no
writev: no
semaphore. Note some filesystems (i.e. remote ones) provide no
protection for i_size so you will need to use the BKL.
-->open() locking is in-transit: big lock partially moved into the methods.
-The only exception is ->open() in the instances of file_operations that never
-end up in ->i_fop/->proc_fops, i.e. ones that belong to character devices
-(chrdev_open() takes lock before replacing ->f_op and calling the secondary
-method. As soon as we fix the handling of module reference counters all
-instances of ->open() will be called without the BKL.
-
Note: ext2_release() was *the* source of contention on fs-intensive
loads and dropping BKL on ->release() helps to get rid of that (we still
grab BKL for cases when we close a file that had been opened r/w, but that
- (bit 1) anonymous shared memory
- (bit 2) file-backed private memory
- (bit 3) file-backed shared memory
+ - (bit 4) ELF header pages in file-backed private memory areas (it is
+ effective only if the bit 2 is cleared)
Note that MMIO pages such as frame buffer are never dumped and vDSO pages
are always dumped regardless of the bitmask status.
M: syrjala@sci.fi
S: Maintained
-ATL1 ETHERNET DRIVER
+ATLX ETHERNET DRIVERS
P: Jay Cliburn
M: jcliburn@gmail.com
P: Chris Snook
M: csnook@redhat.com
+P: Jie Yang
+M: jie.yang@atheros.com
L: atl1-devel@lists.sourceforge.net
W: http://sourceforge.net/projects/atl1
W: http://atl1.sourceforge.net
USB VIDEO CLASS
P: Laurent Pinchart
M: laurent.pinchart@skynet.be
-L: linx-uvc-devel@berlios.de
+L: linux-uvc-devel@lists.berlios.de
L: video4linux-list@redhat.com
W: http://linux-uvc.berlios.de
S: Maintained
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 27
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = Rotary Wombat
# *DOCUMENTATION*
} \
} while (0)
+/*
+ * format for entries in the Global Offset Table
+ */
+struct got_entry {
+ uint64_t val;
+};
+
+/*
+ * Layout of the Function Descriptor
+ */
+struct fdesc {
+ uint64_t ip;
+ uint64_t gp;
+};
+
#endif /* _ASM_IA64_ELF_H */
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
+#include <linux/elf.h>
+#include <linux/uaccess.h>
#include <asm-generic/sections.h>
extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
extern char __start_unwind[], __end_unwind[];
extern char __start_ivt_text[], __end_ivt_text[];
+#undef dereference_function_descriptor
+static inline void *dereference_function_descriptor(void *ptr)
+{
+ struct fdesc *desc = ptr;
+ void *p;
+
+ if (!probe_kernel_address(&desc->ip, p))
+ ptr = p;
+ return ptr;
+}
+
+
#endif /* _ASM_IA64_SECTIONS_H */
* until the transfer is complete. In order to get the asynch
* version of bte_copy, you must perform this check yourself.
*/
-#define BTE_UNALIGNED_COPY(src, dest, len, mode) \
- (((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) || \
- (dest & L1_CACHE_MASK)) ? \
- bte_unaligned_copy(src, dest, len, mode) : \
+#define BTE_UNALIGNED_COPY(src, dest, len, mode) \
+ (((len & (L1_CACHE_BYTES - 1)) || \
+ (src & (L1_CACHE_BYTES - 1)) || \
+ (dest & (L1_CACHE_BYTES - 1))) ? \
+ bte_unaligned_copy(src, dest, len, mode) : \
bte_copy(src, dest, len, mode, NULL))
#undef N
-struct got_entry {
- uint64_t val;
-};
-
-struct fdesc {
- uint64_t ip;
- uint64_t gp;
-};
-
/* Opaque struct for insns, to protect against derefs. */
struct insn;
return -EBUSY;
}
- cpu_clear(cpu, cpu_online_map);
-
if (migrate_platform_irqs(cpu)) {
cpu_set(cpu, cpu_online_map);
return (-EBUSY);
}
remove_siblinginfo(cpu);
- cpu_clear(cpu, cpu_online_map);
fixup_irqs();
+ cpu_clear(cpu, cpu_online_map);
local_flush_tlb_all();
cpu_clear(cpu, cpu_callin_map);
return 0;
entry = find_next_zero_bit(map, mapsize, last_entry);
}
- if (entry > mapsize)
+ if (entry > mapsize) {
+ kfree(ca_dmamap);
goto map_return;
+ }
for (i = 0; i < entries; i++)
set_bit(entry + i, map);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:00 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDEDOUBLER=y
CONFIG_BLK_DEV_BUDDHA=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
CONFIG_GVP11_SCSI=y
CONFIG_SCSI_A4000T=y
CONFIG_SCSI_ZORRO7XX=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_PAULA=m
CONFIG_DMASOUND=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:01 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
-CONFIG_APOLLO_ELPLUS=y
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:02 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_FALCON_IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
CONFIG_ATARI_SCSI=y
# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
# CONFIG_ATARI_SCSI_RESET_BOOT is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_ATARI=m
CONFIG_DMASOUND=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# Character devices
#
CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
CONFIG_ATARI_MIDI=m
CONFIG_ATARI_DSP56K=m
-# CONFIG_SERIAL_CONSOLE is not set
#
# File systems
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
CONFIG_JBD=y
+CONFIG_JBD2=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
-CONFIG_SUNRPC_BIND34=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:03 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_BVME6000_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:04 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:06 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_MAC_IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
# CONFIG_SCSI_DEBUG is not set
CONFIG_MAC_SCSI=y
CONFIG_SCSI_MAC_ESP=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:07 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_ZORRO_NAMES=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_MAC_IDE=y
CONFIG_BLK_DEV_Q40IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
CONFIG_MVME16x_SCSI=y
CONFIG_BVME6000_SCSI=y
CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_HYDRA=m
CONFIG_ZORRO8390=m
CONFIG_APNE=m
-CONFIG_APOLLO_ELPLUS=y
CONFIG_MAC8390=y
CONFIG_MAC89x0=m
CONFIG_MACSONIC=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_MAC_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_ATARI=m
CONFIG_DMASOUND_PAULA=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# Character devices
#
CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_SCC=y
-CONFIG_ATARI_SCC_DMA=y
CONFIG_ATARI_MIDI=m
CONFIG_ATARI_DSP56K=m
CONFIG_AMIGA_BUILTIN_SERIAL=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+# CONFIG_EXT4DEV_FS_XATTR is not set
CONFIG_JBD=y
+CONFIG_JBD2=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:08 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME147_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:09 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME16x_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:10 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_GENERIC_ISA_DMA=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_Q40IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
CONFIG_SOUND=m
CONFIG_DMASOUND_Q40=m
CONFIG_DMASOUND=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:11 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3_SCSI=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Wed May 28 22:47:35 2008
+# Linux kernel version: 2.6.27-rc6
+# Wed Sep 10 09:02:12 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_PROC_HARDWARE=y
CONFIG_ZONE_DMA=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
#
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT=y
+# CONFIG_WIRELESS_EXT_SYSFS is not set
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3X_ESP=y
+# CONFIG_SCSI_DH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-CONFIG_DM_MULTIPATH_RDAC=m
-CONFIG_DM_MULTIPATH_HP=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
#
# Multimedia devices
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set
#
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
# CONFIG_AFS_FS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
#
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
return res;
/* Second HPC is missing? */
- if (!ip22_is_fullhouse() ||
+ if (ip22_is_fullhouse() ||
get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]))
return 0;
* If we're in an interrupt or have no user
* context, we must not take the fault..
*/
- if (in_interrupt() || !mm)
+ if (in_atomic() || !mm)
goto no_context;
down_read(&mm->mmap_sem);
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/bug.h>
+#include <linux/uaccess.h>
+#include <asm/sections.h>
#include <asm/unwind.h>
#if 0
deregister_unwind_table(mod);
module_bug_cleanup(mod);
}
+
+#ifdef CONFIG_64BIT
+void *dereference_function_descriptor(void *ptr)
+{
+ Elf64_Fdesc *desc = ptr;
+ void *p;
+
+ if (!probe_kernel_address(&desc->addr, p))
+ ptr = p;
+ return ptr;
+}
+#endif
return 0;
}
+#undef dereference_function_descriptor
+void *dereference_function_descriptor(void *);
+
#endif
#endif /* __KERNEL__ */
#include <linux/err.h>
#include <linux/vmalloc.h>
#include <linux/bug.h>
+#include <linux/uaccess.h>
#include <asm/module.h>
-#include <asm/uaccess.h>
+#include <asm/sections.h>
#include <asm/firmware.h>
#include <asm/code-patching.h>
#include <linux/sort.h>
return 0;
}
+
+void *dereference_function_descriptor(void *ptr)
+{
+ struct ppc64_opd_entry *desc = ptr;
+ void *p;
+
+ if (!probe_kernel_address(&desc->funcaddr, p))
+ ptr = p;
+ return ptr;
+}
u32 gprs[NUM_GPRS];
u32 acrs[NUM_ACRS];
u32 orig_gpr2;
+ /* nb: there's a 4-byte hole here */
s390_fp_regs fp_regs;
/*
* These per registers are in here so that gdb can modify them
*/
tmp = (addr_t) task_pt_regs(child)->orig_gpr2;
+ } else if (addr < (addr_t) &dummy->regs.fp_regs) {
+ /*
+ * prevent reads of padding hole between
+ * orig_gpr2 and fp_regs on s390.
+ */
+ tmp = 0;
+
} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
*/
task_pt_regs(child)->orig_gpr2 = data;
+ } else if (addr < (addr_t) &dummy->regs.fp_regs) {
+ /*
+ * prevent writes of padding hole between
+ * orig_gpr2 and fp_regs on s390.
+ */
+ return 0;
+
} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
*/
tmp = *(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4);
+ } else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+ /*
+ * prevent reads of padding hole between
+ * orig_gpr2 and fp_regs on s390.
+ */
+ tmp = 0;
+
} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
*/
*(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4) = tmp;
+ } else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+ /*
+ * prevent writess of padding hole between
+ * orig_gpr2 and fp_regs on s390.
+ */
+ return 0;
+
} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
/*
* floating point regs. are stored in the thread structure
return of_bus_default_map(addr, range, na, ns, pna);
}
-static unsigned int of_bus_sbus_get_flags(const u32 *addr)
+static unsigned long of_bus_sbus_get_flags(const u32 *addr, unsigned long flags)
{
return IORESOURCE_MEM;
}
*/
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
- .n = 38 * sizeof(u32),
+ .n = 38,
.size = sizeof(u32), .align = sizeof(u32),
.get = genregs32_get, .set = genregs32_set
},
*/
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = 99 * sizeof(u32),
+ .n = 99,
.size = sizeof(u32), .align = sizeof(u32),
.get = fpregs32_get, .set = fpregs32_set
},
}
spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
}
+
+ tick_ops->disable_irq();
}
#endif
* the second will just error out since we do not pass in
* IRQF_SHARED.
*/
- err = request_irq(op->irqs[1], psycho_ue_intr, 0,
+ err = request_irq(op->irqs[1], psycho_ue_intr, IRQF_SHARED,
"PSYCHO_UE", pbm);
- err = request_irq(op->irqs[2], psycho_ce_intr, 0,
+ err = request_irq(op->irqs[2], psycho_ce_intr, IRQF_SHARED,
"PSYCHO_CE", pbm);
/* This one, however, ought not to fail. We can just warn
* about it since the system can still operate properly even
* if this fails.
*/
- err = request_irq(op->irqs[0], psycho_pcierr_intr, 0,
+ err = request_irq(op->irqs[0], psycho_pcierr_intr, IRQF_SHARED,
"PSYCHO_PCIERR", pbm);
if (err)
printk(KERN_WARNING "%s: Could not register PCIERR, "
return PSYCHO_IMAP_B_SLOT0 + (slot * 8);
}
-#define PSYCHO_IMAP_SCSI 0x1000UL
-#define PSYCHO_IMAP_ETH 0x1008UL
-#define PSYCHO_IMAP_BPP 0x1010UL
-#define PSYCHO_IMAP_AU_REC 0x1018UL
-#define PSYCHO_IMAP_AU_PLAY 0x1020UL
-#define PSYCHO_IMAP_PFAIL 0x1028UL
-#define PSYCHO_IMAP_KMS 0x1030UL
-#define PSYCHO_IMAP_FLPY 0x1038UL
-#define PSYCHO_IMAP_SHW 0x1040UL
-#define PSYCHO_IMAP_KBD 0x1048UL
-#define PSYCHO_IMAP_MS 0x1050UL
-#define PSYCHO_IMAP_SER 0x1058UL
-#define PSYCHO_IMAP_TIM0 0x1060UL
-#define PSYCHO_IMAP_TIM1 0x1068UL
-#define PSYCHO_IMAP_UE 0x1070UL
-#define PSYCHO_IMAP_CE 0x1078UL
-#define PSYCHO_IMAP_A_ERR 0x1080UL
-#define PSYCHO_IMAP_B_ERR 0x1088UL
-#define PSYCHO_IMAP_PMGMT 0x1090UL
-#define PSYCHO_IMAP_GFX 0x1098UL
-#define PSYCHO_IMAP_EUPA 0x10a0UL
-
-static unsigned long __psycho_onboard_imap_off[] = {
-/*0x20*/ PSYCHO_IMAP_SCSI,
-/*0x21*/ PSYCHO_IMAP_ETH,
-/*0x22*/ PSYCHO_IMAP_BPP,
-/*0x23*/ PSYCHO_IMAP_AU_REC,
-/*0x24*/ PSYCHO_IMAP_AU_PLAY,
-/*0x25*/ PSYCHO_IMAP_PFAIL,
-/*0x26*/ PSYCHO_IMAP_KMS,
-/*0x27*/ PSYCHO_IMAP_FLPY,
-/*0x28*/ PSYCHO_IMAP_SHW,
-/*0x29*/ PSYCHO_IMAP_KBD,
-/*0x2a*/ PSYCHO_IMAP_MS,
-/*0x2b*/ PSYCHO_IMAP_SER,
-/*0x2c*/ PSYCHO_IMAP_TIM0,
-/*0x2d*/ PSYCHO_IMAP_TIM1,
-/*0x2e*/ PSYCHO_IMAP_UE,
-/*0x2f*/ PSYCHO_IMAP_CE,
-/*0x30*/ PSYCHO_IMAP_A_ERR,
-/*0x31*/ PSYCHO_IMAP_B_ERR,
-/*0x32*/ PSYCHO_IMAP_PMGMT,
-/*0x33*/ PSYCHO_IMAP_GFX,
-/*0x34*/ PSYCHO_IMAP_EUPA,
-};
+#define PSYCHO_OBIO_IMAP_BASE 0x1000UL
+
#define PSYCHO_ONBOARD_IRQ_BASE 0x20
-#define PSYCHO_ONBOARD_IRQ_LAST 0x34
#define psycho_onboard_imap_offset(__ino) \
- __psycho_onboard_imap_off[(__ino) - PSYCHO_ONBOARD_IRQ_BASE]
+ (PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
#define PSYCHO_ICLR_A_SLOT0 0x1400UL
#define PSYCHO_ICLR_SCSI 0x1800UL
imap_off = psycho_pcislot_imap_offset(ino);
} else {
/* Onboard device */
- if (ino > PSYCHO_ONBOARD_IRQ_LAST) {
- prom_printf("psycho_irq_build: Wacky INO [%x]\n", ino);
- prom_halt();
- }
imap_off = psycho_onboard_imap_offset(ino);
}
#define SABRE_IMAP_A_SLOT0 0x0c00UL
#define SABRE_IMAP_B_SLOT0 0x0c20UL
-#define SABRE_IMAP_SCSI 0x1000UL
-#define SABRE_IMAP_ETH 0x1008UL
-#define SABRE_IMAP_BPP 0x1010UL
-#define SABRE_IMAP_AU_REC 0x1018UL
-#define SABRE_IMAP_AU_PLAY 0x1020UL
-#define SABRE_IMAP_PFAIL 0x1028UL
-#define SABRE_IMAP_KMS 0x1030UL
-#define SABRE_IMAP_FLPY 0x1038UL
-#define SABRE_IMAP_SHW 0x1040UL
-#define SABRE_IMAP_KBD 0x1048UL
-#define SABRE_IMAP_MS 0x1050UL
-#define SABRE_IMAP_SER 0x1058UL
-#define SABRE_IMAP_UE 0x1070UL
-#define SABRE_IMAP_CE 0x1078UL
-#define SABRE_IMAP_PCIERR 0x1080UL
-#define SABRE_IMAP_GFX 0x1098UL
-#define SABRE_IMAP_EUPA 0x10a0UL
#define SABRE_ICLR_A_SLOT0 0x1400UL
#define SABRE_ICLR_B_SLOT0 0x1480UL
#define SABRE_ICLR_SCSI 0x1800UL
return SABRE_IMAP_B_SLOT0 + (slot * 8);
}
-static unsigned long __sabre_onboard_imap_off[] = {
-/*0x20*/ SABRE_IMAP_SCSI,
-/*0x21*/ SABRE_IMAP_ETH,
-/*0x22*/ SABRE_IMAP_BPP,
-/*0x23*/ SABRE_IMAP_AU_REC,
-/*0x24*/ SABRE_IMAP_AU_PLAY,
-/*0x25*/ SABRE_IMAP_PFAIL,
-/*0x26*/ SABRE_IMAP_KMS,
-/*0x27*/ SABRE_IMAP_FLPY,
-/*0x28*/ SABRE_IMAP_SHW,
-/*0x29*/ SABRE_IMAP_KBD,
-/*0x2a*/ SABRE_IMAP_MS,
-/*0x2b*/ SABRE_IMAP_SER,
-/*0x2c*/ 0 /* reserved */,
-/*0x2d*/ 0 /* reserved */,
-/*0x2e*/ SABRE_IMAP_UE,
-/*0x2f*/ SABRE_IMAP_CE,
-/*0x30*/ SABRE_IMAP_PCIERR,
-/*0x31*/ 0 /* reserved */,
-/*0x32*/ 0 /* reserved */,
-/*0x33*/ SABRE_IMAP_GFX,
-/*0x34*/ SABRE_IMAP_EUPA,
-};
-#define SABRE_ONBOARD_IRQ_BASE 0x20
-#define SABRE_ONBOARD_IRQ_LAST 0x30
+#define SABRE_OBIO_IMAP_BASE 0x1000UL
+#define SABRE_ONBOARD_IRQ_BASE 0x20
#define sabre_onboard_imap_offset(__ino) \
- __sabre_onboard_imap_off[(__ino) - SABRE_ONBOARD_IRQ_BASE]
+ (SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
#define sabre_iclr_offset(ino) \
((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
imap_off = sabre_pcislot_imap_offset(ino);
} else {
/* onboard device */
- if (ino > SABRE_ONBOARD_IRQ_LAST) {
- prom_printf("sabre_irq_build: Wacky INO [%x]\n", ino);
- prom_halt();
- }
imap_off = sabre_onboard_imap_offset(ino);
}
*/
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
- .n = 36 * sizeof(u64),
+ .n = 36,
.size = sizeof(u64), .align = sizeof(u64),
.get = genregs64_get, .set = genregs64_set
},
*/
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = 35 * sizeof(u64),
+ .n = 35,
.size = sizeof(u64), .align = sizeof(u64),
.get = fpregs64_get, .set = fpregs64_set
},
*/
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
- .n = 38 * sizeof(u32),
+ .n = 38,
.size = sizeof(u32), .align = sizeof(u32),
.get = genregs32_get, .set = genregs32_set
},
*/
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = 99 * sizeof(u32),
+ .n = 99,
.size = sizeof(u32), .align = sizeof(u32),
.get = fpregs32_get, .set = fpregs32_set
},
# P6_NOPs are a relatively minor optimization that require a family >=
# 6 processor, except that it is broken on certain VIA chips.
# Furthermore, AMD chips prefer a totally different sequence of NOPs
-# (which work on all CPUs). As a result, disallow these if we're
-# compiling X86_GENERIC but not X86_64 (these NOPs do work on all
-# x86-64 capable chips); the list of processors in the right-hand clause
-# are the cores that benefit from this optimization.
+# (which work on all CPUs). In addition, it looks like Virtual PC
+# does not understand them.
+#
+# As a result, disallow these if we're not compiling for X86_64 (these
+# NOPs do work on all x86-64 capable chips); the list of processors in
+# the right-hand clause are the cores that benefit from this optimization.
#
config X86_P6_NOP
def_bool y
- depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4 || MPSC)
+ depends on X86_64
+ depends on (MCORE2 || MPENTIUM4 || MPSC)
config X86_TSC
def_bool y
if (!p)
return -EINVAL;
- if (!strcmp(p, "exactmap")) {
+ if (!strncmp(p, "exactmap", 8)) {
#ifdef CONFIG_CRASH_DUMP
/*
* If we are doing a crash dump, we still need to know
u64 *spte;
int young = 0;
+ /* always return old for EPT */
+ if (!shadow_accessed_mask)
+ return 0;
+
spte = rmap_next(kvm, rmapp, NULL);
while (spte) {
int _young;
module_param(npt, int, S_IRUGO);
static void kvm_reput_irq(struct vcpu_svm *svm);
+static void svm_flush_tlb(struct kvm_vcpu *vcpu);
static inline struct vcpu_svm *to_svm(struct kvm_vcpu *vcpu)
{
static void svm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
{
unsigned long host_cr4_mce = read_cr4() & X86_CR4_MCE;
+ unsigned long old_cr4 = to_svm(vcpu)->vmcb->save.cr4;
+
+ if (npt_enabled && ((old_cr4 ^ cr4) & X86_CR4_PGE))
+ force_new_asid(vcpu);
vcpu->arch.cr4 = cr4;
if (!npt_enabled)
KVMTRACE_3D(TDP_FAULT, &svm->vcpu, error_code,
(u32)fault_address, (u32)(fault_address >> 32),
handler);
+ /*
+ * FIXME: Tis shouldn't be necessary here, but there is a flush
+ * missing in the MMU code. Until we find this bug, flush the
+ * complete TLB here on an NPF
+ */
+ if (npt_enabled)
+ svm_flush_tlb(&svm->vcpu);
if (event_injection)
kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
VMX_EPT_WRITABLE_MASK |
VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
- kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
- VMX_EPT_FAKE_DIRTY_MASK, 0ull,
+ kvm_mmu_set_mask_ptes(0ull, 0ull, 0ull, 0ull,
VMX_EPT_EXECUTABLE_MASK);
kvm_enable_tdp();
} else
#define VMX_EPT_READABLE_MASK 0x1ull
#define VMX_EPT_WRITABLE_MASK 0x2ull
#define VMX_EPT_EXECUTABLE_MASK 0x4ull
-#define VMX_EPT_FAKE_ACCESSED_MASK (1ull << 62)
-#define VMX_EPT_FAKE_DIRTY_MASK (1ull << 63)
#define VMX_EPT_IDENTITY_PAGETABLE_ADDR 0xfffbc000ul
}
EXPORT_SYMBOL(blk_verify_command);
+#if 0
/* and now, the sysfs stuff */
static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page,
int rw)
kobject_put(disk->holder_dir->parent);
}
EXPORT_SYMBOL(blk_unregister_filter);
+#endif
ide_proc_unregister_driver(drive, info->driver);
- blk_unregister_filter(info->disk);
del_gendisk(info->disk);
ide_cd_put(info);
g->fops = &idecd_ops;
g->flags |= GENHD_FL_REMOVABLE;
add_disk(g);
- blk_register_filter(g);
return 0;
out_free_cd:
return 0;
}
+static struct hpt_info *hpt3xx_get_info(struct device *dev)
+{
+ struct ide_host *host = dev_get_drvdata(dev);
+ struct hpt_info *info = (struct hpt_info *)host->host_priv;
+
+ return dev == host->dev[1] ? info + 1 : info;
+}
+
/*
* The Marvell bridge chips used on the HighPoint SATA cards do not seem
* to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes...
static u8 hpt3xx_udma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
u8 mask = hwif->ultra_mask;
switch (info->chip_type) {
static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
switch (info->chip_type) {
case HPT372 :
{
ide_hwif_t *hwif = drive->hwif;
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
struct hpt_timings *t = info->timings;
u8 itr_addr = 0x40 + (drive->dn * 4);
u32 old_itr = 0;
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
if (drive->quirk_list) {
if (info->chip_type >= HPT370) {
static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
{
unsigned long io_base = pci_resource_start(dev, 4);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(&dev->dev);
const char *name = DRV_NAME;
u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */
u8 chip_type;
static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
u8 chip_type = info->chip_type;
u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (hwif->dev == host->dev[1]);
+ struct hpt_info *info = hpt3xx_get_info(hwif->dev);
int serialize = HPT_SERIALIZE_IO;
u8 chip_type = info->chip_type;
u8 new_mcr, old_mcr = 0;
config VIDEO_SH_MOBILE_CEU
tristate "SuperH Mobile CEU Interface driver"
- depends on VIDEO_DEV
+ depends on VIDEO_DEV && HAS_DMA
select SOC_CAMERA
select VIDEOBUF_DMA_CONTIG
---help---
}
static struct class memstick_host_class = {
- .name = "memstick_host",
+ .name = "memstick_host",
.dev_release = memstick_free
};
* @sg - TPC argument
*/
void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
- struct scatterlist *sg)
+ const struct scatterlist *sg)
{
mrq->tpc = tpc;
if (tpc & 8)
* user supplied buffer.
*/
void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
- void *buf, size_t length)
+ const void *buf, size_t length)
{
mrq->tpc = tpc;
if (tpc & 8)
if (!host->card) {
if (memstick_power_on(host))
goto out_power_off;
- } else
+ } else if (host->card->stop)
host->card->stop(host->card);
card = memstick_alloc_card(host);
|| !(host->card->check(host->card))) {
device_unregister(&host->card->dev);
host->card = NULL;
- } else
+ } else if (host->card->start)
host->card->start(host->card);
}
#define MSPRO_BLOCK_SIGNATURE 0xa5c3
#define MSPRO_BLOCK_MAX_ATTRIBUTES 41
+#define MSPRO_BLOCK_PART_SHIFT 3
+
enum {
MSPRO_BLOCK_ID_SYSINFO = 0x10,
MSPRO_BLOCK_ID_MODELNAME = 0x15,
static int mspro_block_disk_release(struct gendisk *disk)
{
struct mspro_block_data *msb = disk->private_data;
- int disk_id = disk->first_minor >> MEMSTICK_PART_SHIFT;
+ int disk_id = disk->first_minor >> MSPRO_BLOCK_PART_SHIFT;
mutex_lock(&mspro_block_disk_lock);
struct mspro_block_data *msb = memstick_get_drvdata(card);
int rc = 0;
+try_again:
if (msb->caps & MEMSTICK_CAP_PAR4)
rc = mspro_block_set_interface(card, MEMSTICK_SYS_PAR4);
else
rc = memstick_set_rw_addr(card);
if (!rc)
rc = mspro_block_set_interface(card, msb->system);
+
+ if (!rc) {
+ msleep(150);
+ rc = mspro_block_wait_for_ced(card);
+ if (rc)
+ return rc;
+
+ if (msb->caps & MEMSTICK_CAP_PAR8) {
+ msb->caps &= ~MEMSTICK_CAP_PAR8;
+ goto try_again;
+ }
+ }
}
return rc;
}
return -EIO;
msb->caps = host->caps;
- rc = mspro_block_switch_interface(card);
+
+ msleep(150);
+ rc = mspro_block_wait_for_ced(card);
if (rc)
return rc;
- msleep(200);
- rc = mspro_block_wait_for_ced(card);
+ rc = mspro_block_switch_interface(card);
if (rc)
return rc;
+
dev_dbg(&card->dev, "card activated\n");
if (msb->system != MEMSTICK_SYS_SERIAL)
msb->caps |= MEMSTICK_CAP_AUTO_GET_INT;
if (rc)
return rc;
- if ((disk_id << MEMSTICK_PART_SHIFT) > 255) {
+ if ((disk_id << MSPRO_BLOCK_PART_SHIFT) > 255) {
rc = -ENOSPC;
goto out_release_id;
}
- msb->disk = alloc_disk(1 << MEMSTICK_PART_SHIFT);
+ msb->disk = alloc_disk(1 << MSPRO_BLOCK_PART_SHIFT);
if (!msb->disk) {
rc = -ENOMEM;
goto out_release_id;
MSPRO_BLOCK_MAX_PAGES * msb->page_size);
msb->disk->major = major;
- msb->disk->first_minor = disk_id << MEMSTICK_PART_SHIFT;
+ msb->disk->first_minor = disk_id << MSPRO_BLOCK_PART_SHIFT;
msb->disk->fops = &ms_block_bdops;
msb->usage_count = 1;
msb->disk->private_data = msb;
static struct memstick_device_id mspro_block_id_tbl[] = {
{MEMSTICK_MATCH_ALL, MEMSTICK_TYPE_PRO, MEMSTICK_CATEGORY_STORAGE_DUO,
- MEMSTICK_CLASS_GENERIC_DUO},
+ MEMSTICK_CLASS_DUO},
{}
};
#define TPC_CODE_SZ_MASK 0x00000700
#define TPC_DATA_SZ_MASK 0x00000007
+#define HOST_CONTROL_TDELAY_EN 0x00040000
+#define HOST_CONTROL_HW_OC_P 0x00010000
#define HOST_CONTROL_RESET_REQ 0x00008000
#define HOST_CONTROL_REI 0x00004000
#define HOST_CONTROL_LED 0x00000400
#define HOST_CONTROL_RESET 0x00000100
#define HOST_CONTROL_POWER_EN 0x00000080
#define HOST_CONTROL_CLOCK_EN 0x00000040
+#define HOST_CONTROL_REO 0x00000008
#define HOST_CONTROL_IF_SHIFT 4
#define HOST_CONTROL_IF_SERIAL 0x0
#define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000
#define CLOCK_CONTROL_40MHZ 0x00000001
-#define CLOCK_CONTROL_50MHZ 0x00000002
+#define CLOCK_CONTROL_50MHZ 0x0000000a
#define CLOCK_CONTROL_60MHZ 0x00000008
#define CLOCK_CONTROL_62_5MHZ 0x0000000c
#define CLOCK_CONTROL_OFF 0x00000000
+#define PCI_CTL_CLOCK_DLY_ADDR 0x000000b0
+#define PCI_CTL_CLOCK_DLY_MASK_A 0x00000f00
+#define PCI_CTL_CLOCK_DLY_MASK_B 0x0000f000
+
enum {
CMD_READY = 0x01,
FIFO_READY = 0x02,
return host->req->error;
}
- dev_dbg(&msh->dev, "control %08x\n",
- readl(host->addr + HOST_CONTROL));
+ dev_dbg(&msh->dev, "control %08x\n", readl(host->addr + HOST_CONTROL));
dev_dbg(&msh->dev, "status %08x\n", readl(host->addr + INT_STATUS));
dev_dbg(&msh->dev, "hstatus %08x\n", readl(host->addr + STATUS));
ndelay(20);
}
dev_dbg(&host->chip->pdev->dev, "reset_req timeout\n");
- return -EIO;
+ /* return -EIO; */
reset_next:
writel(HOST_CONTROL_RESET | HOST_CONTROL_CLOCK_EN
host_ctl = 7;
host_ctl |= HOST_CONTROL_POWER_EN
- | HOST_CONTROL_CLOCK_EN;
+ | HOST_CONTROL_CLOCK_EN
+ | HOST_CONTROL_HW_OC_P
+ | HOST_CONTROL_TDELAY_EN;
writel(host_ctl, host->addr + HOST_CONTROL);
writel(host->id ? PAD_PU_PD_ON_MS_SOCK1
break;
case MEMSTICK_INTERFACE:
host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT);
+ pci_read_config_dword(host->chip->pdev,
+ PCI_CTL_CLOCK_DLY_ADDR,
+ &clock_delay);
+ clock_delay &= host->id ? ~PCI_CTL_CLOCK_DLY_MASK_B
+ : ~PCI_CTL_CLOCK_DLY_MASK_A;
if (value == MEMSTICK_SERIAL) {
host_ctl &= ~HOST_CONTROL_FAST_CLK;
+ host_ctl &= ~HOST_CONTROL_REO;
host_ctl |= HOST_CONTROL_IF_SERIAL
<< HOST_CONTROL_IF_SHIFT;
host_ctl |= HOST_CONTROL_REI;
clock_ctl = CLOCK_CONTROL_40MHZ;
- clock_delay = 0;
} else if (value == MEMSTICK_PAR4) {
- host_ctl |= HOST_CONTROL_FAST_CLK;
+ host_ctl |= HOST_CONTROL_FAST_CLK | HOST_CONTROL_REO;
host_ctl |= HOST_CONTROL_IF_PAR4
<< HOST_CONTROL_IF_SHIFT;
host_ctl &= ~HOST_CONTROL_REI;
clock_ctl = CLOCK_CONTROL_40MHZ;
- clock_delay = 4;
+ clock_delay |= host->id ? (4 << 12) : (4 << 8);
} else if (value == MEMSTICK_PAR8) {
host_ctl |= HOST_CONTROL_FAST_CLK;
host_ctl |= HOST_CONTROL_IF_PAR8
<< HOST_CONTROL_IF_SHIFT;
- host_ctl &= ~HOST_CONTROL_REI;
- clock_ctl = CLOCK_CONTROL_60MHZ;
- clock_delay = 0;
+ host_ctl &= ~(HOST_CONTROL_REI | HOST_CONTROL_REO);
+ clock_ctl = CLOCK_CONTROL_50MHZ;
} else
return -EINVAL;
+
writel(host_ctl, host->addr + HOST_CONTROL);
writel(clock_ctl, host->addr + CLOCK_CONTROL);
- writel(clock_delay, host->addr + CLOCK_DELAY);
+ pci_write_config_dword(host->chip->pdev,
+ PCI_CTL_CLOCK_DLY_ADDR,
+ clock_delay);
break;
};
return 0;
int order = get_order(sizeof(struct gru_state) *
GRU_CHIPLETS_PER_BLADE);
+ if (!IS_UV())
+ return;
+
for (i = 0; i < GRU_CHIPLETS_PER_BLADE; i++)
free_irq(IRQ_GRU + i, NULL);
ret = sysfs_create_group(&chp->dev.kobj, &chp_attr_group);
if (ret) {
device_unregister(&chp->dev);
- goto out_free;
+ goto out;
}
mutex_lock(&channel_subsystems[chpid.cssid]->mutex);
if (channel_subsystems[chpid.cssid]->cm_enabled) {
sysfs_remove_group(&chp->dev.kobj, &chp_attr_group);
device_unregister(&chp->dev);
mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
- goto out_free;
+ goto out;
}
}
channel_subsystems[chpid.cssid]->chps[chpid.id] = chp;
mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
- return ret;
+ goto out;
out_free:
kfree(chp);
+out:
return ret;
}
case 1: /* status pending */
case 2: /* busy */
return -EBUSY;
- default: /* device/path not operational */
+ case 3: /* device/path not operational */
return cio_start_handle_notoper(sch, lpm);
+ default:
+ return ccode;
}
}
css = to_css(dev);
mutex_destroy(&css->mutex);
+ if (css->pseudo_subchannel) {
+ /* Implies that it has been generated but never registered. */
+ css_subchannel_release(&css->pseudo_subchannel->dev);
+ css->pseudo_subchannel = NULL;
+ }
kfree(css);
}
}
channel_subsystems[i] = css;
ret = setup_css(i);
- if (ret)
- goto out_free;
+ if (ret) {
+ kfree(channel_subsystems[i]);
+ goto out_unregister;
+ }
ret = device_register(&css->device);
- if (ret)
- goto out_free_all;
+ if (ret) {
+ put_device(&css->device);
+ goto out_unregister;
+ }
if (css_chsc_characteristics.secm) {
ret = device_create_file(&css->device,
&dev_attr_cm_enable);
}
ret = register_reboot_notifier(&css_reboot_notifier);
if (ret)
- goto out_pseudo;
+ goto out_unregister;
css_init_done = 1;
/* Enable default isc for I/O subchannels. */
for_each_subchannel(__init_channel_subsystem, NULL);
return 0;
-out_pseudo:
- device_unregister(&channel_subsystems[i]->pseudo_subchannel->dev);
out_file:
- device_remove_file(&channel_subsystems[i]->device,
- &dev_attr_cm_enable);
+ if (css_chsc_characteristics.secm)
+ device_remove_file(&channel_subsystems[i]->device,
+ &dev_attr_cm_enable);
out_device:
device_unregister(&channel_subsystems[i]->device);
-out_free_all:
- kfree(channel_subsystems[i]->pseudo_subchannel->lock);
- kfree(channel_subsystems[i]->pseudo_subchannel);
-out_free:
- kfree(channel_subsystems[i]);
out_unregister:
while (i > 0) {
struct channel_subsystem *css;
i--;
css = channel_subsystems[i];
device_unregister(&css->pseudo_subchannel->dev);
+ css->pseudo_subchannel = NULL;
if (css_chsc_characteristics.secm)
device_remove_file(&css->device,
&dev_attr_cm_enable);
{
struct subchannel *sch;
+ /* Allow ccw_device_offline while disconnected. */
+ if (cdev->private->state == DEV_STATE_DISCONNECTED ||
+ cdev->private->state == DEV_STATE_NOT_OPER) {
+ cdev->private->flags.donotify = 0;
+ ccw_device_done(cdev, DEV_STATE_NOT_OPER);
+ return 0;
+ }
if (ccw_device_is_orphan(cdev)) {
ccw_device_done(cdev, DEV_STATE_OFFLINE);
return 0;
*/
static int zfcp_ccw_notify(struct ccw_device *ccw_device, int event)
{
- struct zfcp_adapter *adapter;
+ struct zfcp_adapter *adapter = dev_get_drvdata(&ccw_device->dev);
- down(&zfcp_data.config_sema);
- adapter = dev_get_drvdata(&ccw_device->dev);
switch (event) {
case CIO_GONE:
dev_warn(&adapter->ccw_device->dev, "device gone\n");
89, NULL);
break;
}
- zfcp_erp_wait(adapter);
- up(&zfcp_data.config_sema);
return 1;
}
struct scatterlist sg_resp[ZFCP_GPN_FT_BUFFERS];
};
-static struct zfcp_port *zfcp_get_port_by_did(struct zfcp_adapter *adapter,
- u32 d_id)
-{
- struct zfcp_port *port;
-
- list_for_each_entry(port, &adapter->port_list_head, list)
- if ((port->d_id == d_id) &&
- !atomic_test_mask(ZFCP_STATUS_COMMON_REMOVE, &port->status))
- return port;
- return NULL;
-}
-
static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
struct fcp_rscn_element *elem)
{
zfcp_port_get(port);
retval = zfcp_fc_adisc(port);
- if (retval == 0 || retval == -EBUSY)
+ if (retval == 0)
return;
/* send of ADISC was not possible */
zfcp_port_put(port);
- zfcp_erp_port_forced_reopen(port, 0, 65, NULL);
+ if (retval != -EBUSY)
+ zfcp_erp_port_forced_reopen(port, 0, 65, NULL);
}
static int zfcp_scan_get_nameserver(struct zfcp_adapter *adapter)
if (ret)
return ret;
zfcp_erp_wait(adapter);
- zfcp_port_put(adapter->nameserver_port);
}
return !atomic_test_mask(ZFCP_STATUS_COMMON_UNBLOCKED,
&adapter->nameserver_port->status);
struct zfcp_adapter *adapter = ct->port->adapter;
struct zfcp_port *port, *tmp;
u32 d_id;
- int ret = 0, x;
+ int ret = 0, x, last = 0;
if (ct->status)
return -EIO;
down(&zfcp_data.config_sema);
/* first entry is the header */
- for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES; x++) {
+ for (x = 1; x < ZFCP_GPN_FT_MAX_ENTRIES && !last; x++) {
if (x % (ZFCP_GPN_FT_ENTRIES + 1))
acc++;
else
acc = sg_virt(++sg);
+ last = acc->control & 0x80;
d_id = acc->port_id[0] << 16 | acc->port_id[1] << 8 |
acc->port_id[2];
/* skip the adapter's port and known remote ports */
- if (acc->wwpn == fc_host_port_name(adapter->scsi_host) ||
- zfcp_get_port_by_did(adapter, d_id))
+ if (acc->wwpn == fc_host_port_name(adapter->scsi_host))
+ continue;
+ port = zfcp_get_port_by_wwpn(adapter, acc->wwpn);
+ if (port) {
+ zfcp_port_get(port);
continue;
+ }
port = zfcp_port_enqueue(adapter, acc->wwpn,
ZFCP_STATUS_PORT_DID_DID |
ret = PTR_ERR(port);
else
zfcp_erp_port_reopen(port, 0, 149, NULL);
- if (acc->control & 0x80) /* last entry */
- break;
}
zfcp_erp_wait(adapter);
static int zfcp_fsf_sbal_check(struct zfcp_qdio_queue *queue)
{
- spin_lock(&queue->lock);
+ spin_lock_bh(&queue->lock);
if (atomic_read(&queue->count))
return 1;
- spin_unlock(&queue->lock);
+ spin_unlock_bh(&queue->lock);
return 0;
}
long ret;
struct zfcp_qdio_queue *req_q = &adapter->req_q;
- spin_unlock(&req_q->lock);
+ spin_unlock_bh(&req_q->lock);
ret = wait_event_interruptible_timeout(adapter->request_wq,
zfcp_fsf_sbal_check(req_q), 5 * HZ);
if (ret > 0)
return 0;
- spin_lock(&req_q->lock);
+ spin_lock_bh(&req_q->lock);
return -EIO;
}
volatile struct qdio_buffer_element *sbale;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_UNSOLICITED_STATUS,
ZFCP_REQ_NO_QTCB,
adapter->pool.fsf_req_status_read);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
zfcp_fsf_req_free(req);
zfcp_hba_dbf_event_fsf_unsol("fail", adapter, NULL);
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_ABORT_FCP_CMND,
req_flags, adapter->pool.fsf_req_abort);
- if (unlikely(IS_ERR(req)))
+ if (IS_ERR(req))
goto out;
if (unlikely(!(atomic_read(&unit->status) &
struct zfcp_fsf_req *req;
int ret = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_GENERIC,
ZFCP_REQ_AUTO_CLEANUP, pool);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
ret = PTR_ERR(req);
goto out;
}
if (erp_action)
erp_action->fsf_req = NULL;
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return ret;
}
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_SEND_ELS,
ZFCP_REQ_AUTO_CLEANUP, NULL);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
ret = PTR_ERR(req);
goto out;
}
struct zfcp_adapter *adapter = erp_action->adapter;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (!atomic_read(&adapter->req_q.count))
goto out;
req = zfcp_fsf_req_create(adapter,
FSF_QTCB_EXCHANGE_CONFIG_DATA,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req = NULL;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA,
0, NULL);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
if (!retval)
wait_event(req->completion_wq,
req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT))
return -EOPNOTSUPP;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (!atomic_read(&adapter->req_q.count))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
if (!(adapter->adapter_features & FSF_FEATURE_HBAAPI_MANAGEMENT))
return -EOPNOTSUPP;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (!atomic_read(&adapter->req_q.count))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0,
NULL);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
if (!retval)
wait_event(req->completion_wq,
req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
FSF_QTCB_OPEN_PORT_WITH_DID,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PORT,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_PHYSICAL_PORT,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_OPEN_LUN,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
struct zfcp_fsf_req *req;
int retval = -EIO;
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_CLOSE_LUN,
ZFCP_REQ_AUTO_CLEANUP,
adapter->pool.fsf_req_erp);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
erp_action->fsf_req = NULL;
}
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
return retval;
}
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
adapter->pool.fsf_req_scsi);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = PTR_ERR(req);
goto out;
}
goto out;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_FCP_CMND, req_flags,
adapter->pool.fsf_req_scsi);
- if (unlikely(IS_ERR(req)))
+ if (IS_ERR(req))
goto out;
req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT;
return ERR_PTR(-EINVAL);
}
- spin_lock(&adapter->req_q.lock);
+ spin_lock_bh(&adapter->req_q.lock);
if (zfcp_fsf_req_sbal_get(adapter))
goto out;
req = zfcp_fsf_req_create(adapter, fsf_cfdc->command, 0, NULL);
- if (unlikely(IS_ERR(req))) {
+ if (IS_ERR(req)) {
retval = -EPERM;
goto out;
}
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
out:
- spin_unlock(&adapter->req_q.lock);
+ spin_unlock_bh(&adapter->req_q.lock);
if (!retval) {
wait_event(req->completion_wq,
/* clear QDIOUP flag, thus do_QDIO is not called during qdio_shutdown */
req_q = &adapter->req_q;
- spin_lock(&req_q->lock);
+ spin_lock_bh(&req_q->lock);
atomic_clear_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &adapter->status);
- spin_unlock(&req_q->lock);
+ spin_unlock_bh(&req_q->lock);
qdio_shutdown(adapter->ccw_device, QDIO_FLAG_CLEANUP_USING_CLEAR);
config BLK_DEV_SD
tristate "SCSI disk support"
depends on SCSI
- select CRC_T10DIF
+ select CRC_T10DIF if BLK_DEV_INTEGRITY
---help---
If you want to use SCSI hard disks, Fibre Channel disks,
Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
/*
* LUN Not Accessible - ALUA state transition
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x0b)
/*
* LUN Not Accessible -- Target port in standby state
/*
* Power On, Reset, or Bus Device Reset, just retry.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x06) {
/*
* ALUA state changed
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
}
if (sense_hdr->asc == 0x2a && sense_hdr->ascq == 0x07) {
/*
* Implicit ALUA state transition failed
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
}
break;
}
if (!err)
return SCSI_DH_IO;
err = alua_check_sense(sdev, &sense_hdr);
- if (retry > 0 && err == NEEDS_RETRY) {
+ if (retry > 0 && err == ADD_TO_MLQUEUE) {
retry--;
goto retry;
}
return SCSI_DH_IO;
err = alua_check_sense(sdev, &sense_hdr);
- if (err == NEEDS_RETRY)
+ if (err == ADD_TO_MLQUEUE)
goto retry;
sdev_printk(KERN_INFO, sdev,
"%s: rtpg sense code %02x/%02x/%02x\n",
* Unit Attention Code. This is the first IO
* to the new path, so just retry.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
break;
}
return SCSI_DH_IO;
err = clariion_check_sense(sdev, &sshdr);
- if (retry > 0 && err == NEEDS_RETRY) {
+ if (retry > 0 && err == ADD_TO_MLQUEUE) {
retry--;
goto retry;
}
*
* Just retry and wait.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
break;
case ILLEGAL_REQUEST:
if (sense_hdr->asc == 0x94 && sense_hdr->ascq == 0x01) {
/*
* Power On, Reset, or Bus Device Reset, just retry.
*/
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
break;
}
/* success just means we do not care what scsi-ml does */
case HARDWARE_ERROR:
if (scmd->device->retry_hwerror)
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
else
return SUCCESS;
* PDT=1Fh none (no FDD connected to the requested logical unit)
*/
if (((result[0] >> 5) == 1 || starget->pdt_1f_for_no_lun) &&
- (result[0] & 0x1f) == 0x1f) {
+ (result[0] & 0x1f) == 0x1f &&
+ !scsi_is_wlun(lun)) {
SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
"scsi scan: peripheral device type"
" of 31, no device added\n"));
dev_set_drvdata(dev, sdkp);
add_disk(gd);
- blk_register_filter(gd);
sd_dif_config_host(sdkp);
sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
struct scsi_disk *sdkp = dev_get_drvdata(dev);
device_del(&sdkp->dev);
- blk_unregister_filter(sdkp->disk);
del_gendisk(sdkp->disk);
sd_shutdown(dev);
dev_set_drvdata(dev, cd);
disk->flags |= GENHD_FL_REMOVABLE;
add_disk(disk);
- blk_register_filter(disk);
sdev_printk(KERN_DEBUG, sdev,
"Attached scsi CD-ROM %s\n", cd->cdi.name);
{
struct scsi_cd *cd = dev_get_drvdata(dev);
- blk_unregister_filter(cd->disk);
del_gendisk(cd->disk);
mutex_lock(&sr_ref_mutex);
#define MAX_BUSES 3
-#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
-#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
-#define IS_DMA_ALIGNED(x) (((u32)(x)&0x07)==0)
+#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
+#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
+#define IS_DMA_ALIGNED(x) (((x) & 0x07) == 0)
+#define MAX_DMA_LEN 8191
/*
* for testing SSCR1 changes that require SSP restart, basically
size_t tx_map_len;
u8 n_bytes;
u32 dma_width;
- int cs_change;
int (*write)(struct driver_data *drv_data);
int (*read)(struct driver_data *drv_data);
irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
struct spi_transfer,
transfer_list);
+ /* Delay if requested before any change in chip select */
+ if (last_transfer->delay_usecs)
+ udelay(last_transfer->delay_usecs);
+
+ /* Drop chip select UNLESS cs_change is true or we are returning
+ * a message with an error, or next message is for another chip
+ */
if (!last_transfer->cs_change)
drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ else {
+ struct spi_message *next_msg;
+
+ /* Holding of cs was hinted, but we need to make sure
+ * the next message is for the same chip. Don't waste
+ * time with the following tests unless this was hinted.
+ *
+ * We cannot postpone this until pump_messages, because
+ * after calling msg->complete (below) the driver that
+ * sent the current message could be unloaded, which
+ * could invalidate the cs_control() callback...
+ */
+
+ /* get a pointer to the next message, if any */
+ spin_lock_irqsave(&drv_data->lock, flags);
+ if (list_empty(&drv_data->queue))
+ next_msg = NULL;
+ else
+ next_msg = list_entry(drv_data->queue.next,
+ struct spi_message, queue);
+ spin_unlock_irqrestore(&drv_data->lock, flags);
+
+ /* see if the next and current messages point
+ * to the same chip
+ */
+ if (next_msg && next_msg->spi != msg->spi)
+ next_msg = NULL;
+ if (!next_msg || msg->state == ERROR_STATE)
+ drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ }
msg->state = NULL;
if (msg->complete)
msg->actual_length += drv_data->len -
(drv_data->rx_end - drv_data->rx);
- /* Release chip select if requested, transfer delays are
- * handled in pump_transfers */
- if (drv_data->cs_change)
- drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ /* Transfer delays and chip select release are
+ * handled in pump_transfers or giveback
+ */
/* Move to next transfer */
msg->state = next_transfer(drv_data);
drv_data->cur_msg->actual_length += drv_data->len -
(drv_data->rx_end - drv_data->rx);
- /* Release chip select if requested, transfer delays are
- * handled in pump_transfers */
- if (drv_data->cs_change)
- drv_data->cs_control(PXA2XX_CS_DEASSERT);
+ /* Transfer delays and chip select release are
+ * handled in pump_transfers or giveback
+ */
/* Move to next transfer */
drv_data->cur_msg->state = next_transfer(drv_data);
return;
}
- /* Delay if requested at end of transfer*/
+ /* Delay if requested at end of transfer before CS change */
if (message->state == RUNNING_STATE) {
previous = list_entry(transfer->transfer_list.prev,
struct spi_transfer,
transfer_list);
if (previous->delay_usecs)
udelay(previous->delay_usecs);
+
+ /* Drop chip select only if cs_change is requested */
+ if (previous->cs_change)
+ drv_data->cs_control(PXA2XX_CS_DEASSERT);
}
- /* Check transfer length */
- if (transfer->len > 8191)
- {
- dev_warn(&drv_data->pdev->dev, "pump_transfers: transfer "
- "length greater than 8191\n");
- message->status = -EINVAL;
- giveback(drv_data);
- return;
+ /* Check for transfers that need multiple DMA segments */
+ if (transfer->len > MAX_DMA_LEN && chip->enable_dma) {
+
+ /* reject already-mapped transfers; PIO won't always work */
+ if (message->is_dma_mapped
+ || transfer->rx_dma || transfer->tx_dma) {
+ dev_err(&drv_data->pdev->dev,
+ "pump_transfers: mapped transfer length "
+ "of %lu is greater than %d\n",
+ transfer->len, MAX_DMA_LEN);
+ message->status = -EINVAL;
+ giveback(drv_data);
+ return;
+ }
+
+ /* warn ... we force this to PIO mode */
+ if (printk_ratelimit())
+ dev_warn(&message->spi->dev, "pump_transfers: "
+ "DMA disabled for transfer length %ld "
+ "greater than %d\n",
+ (long)drv_data->len, MAX_DMA_LEN);
}
/* Setup the transfer state based on the type of transfer */
drv_data->len = transfer->len & DCMD_LENGTH;
drv_data->write = drv_data->tx ? chip->write : null_writer;
drv_data->read = drv_data->rx ? chip->read : null_reader;
- drv_data->cs_change = transfer->cs_change;
/* Change speed and bit per word on a per transfer */
cr0 = chip->cr0;
&dma_thresh))
if (printk_ratelimit())
dev_warn(&message->spi->dev,
- "pump_transfer: "
+ "pump_transfers: "
"DMA burst size reduced to "
"match bits_per_word\n");
}
message->state = RUNNING_STATE;
- /* Try to map dma buffer and do a dma transfer if successful */
- if ((drv_data->dma_mapped = map_dma_buffers(drv_data))) {
+ /* Try to map dma buffer and do a dma transfer if successful, but
+ * only if the length is non-zero and less than MAX_DMA_LEN.
+ *
+ * Zero-length non-descriptor DMA is illegal on PXA2xx; force use
+ * of PIO instead. Care is needed above because the transfer may
+ * have have been passed with buffers that are already dma mapped.
+ * A zero-length transfer in PIO mode will not try to write/read
+ * to/from the buffers
+ *
+ * REVISIT large transfers are exactly where we most want to be
+ * using DMA. If this happens much, split those transfers into
+ * multiple DMA segments rather than forcing PIO.
+ */
+ drv_data->dma_mapped = 0;
+ if (drv_data->len > 0 && drv_data->len <= MAX_DMA_LEN)
+ drv_data->dma_mapped = map_dma_buffers(drv_data);
+ if (drv_data->dma_mapped) {
/* Ensure we have the correct interrupt handler */
drv_data->transfer_handler = dma_transfer;
cs->hw_mode |= SPMODE_LEN(bits_per_word);
if ((mpc83xx_spi->spibrg / hz) > 64) {
+ cs->hw_mode |= SPMODE_DIV16;
pm = mpc83xx_spi->spibrg / (hz * 64);
if (pm > 16) {
- cs->hw_mode |= SPMODE_DIV16;
- pm /= 16;
- if (pm > 16) {
- dev_err(&spi->dev, "Requested speed is too "
- "low: %d Hz. Will use %d Hz instead.\n",
- hz, mpc83xx_spi->spibrg / 1024);
- pm = 16;
- }
+ dev_err(&spi->dev, "Requested speed is too "
+ "low: %d Hz. Will use %d Hz instead.\n",
+ hz, mpc83xx_spi->spibrg / 1024);
+ pm = 16;
}
} else
pm = mpc83xx_spi->spibrg / (hz * 4);
if (t->bits_per_word)
bits_per_word = t->bits_per_word;
len = t->len;
- if (bits_per_word > 8)
+ if (bits_per_word > 8) {
+ /* invalid length? */
+ if (len & 1)
+ return -EINVAL;
len /= 2;
- if (bits_per_word > 16)
+ }
+ if (bits_per_word > 16) {
+ /* invalid length? */
+ if (len & 1)
+ return -EINVAL;
len /= 2;
+ }
mpc83xx_spi->count = len;
+
INIT_COMPLETION(mpc83xx_spi->done);
/* enable rx ints */
#endif
MODULE_ALIAS("platform:s3c2410-spi");
-static struct platform_driver s3c24xx_spidrv = {
+static struct platform_driver s3c24xx_spi_driver = {
.remove = __exit_p(s3c24xx_spi_remove),
.suspend = s3c24xx_spi_suspend,
.resume = s3c24xx_spi_resume,
static int __init s3c24xx_spi_init(void)
{
- return platform_driver_probe(&s3c24xx_spidrv, s3c24xx_spi_probe);
+ return platform_driver_probe(&s3c24xx_spi_driver, s3c24xx_spi_probe);
}
static void __exit s3c24xx_spi_exit(void)
{
- platform_driver_unregister(&s3c24xx_spidrv);
+ platform_driver_unregister(&s3c24xx_spi_driver);
}
module_init(s3c24xx_spi_init);
return value;
}
+static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
+{
+ /* Turn off the LCD controller and the DMA controller */
+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+ sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
+
+ /* Wait for the LCDC core to become idle */
+ while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
+ msleep(10);
+
+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+}
+
+static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
+{
+ atmel_lcdfb_stop_nowait(sinfo);
+
+ /* Wait for DMA engine to become idle... */
+ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+ msleep(10);
+}
+
+static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
+{
+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+ (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
+ | ATMEL_LCDC_PWR);
+}
+
static void atmel_lcdfb_update_dma(struct fb_info *info,
struct fb_var_screeninfo *var)
{
{
might_sleep();
- /* LCD power off */
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
- /* wait for the LCDC core to become idle */
- while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
- msleep(10);
-
- /* DMA disable */
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
-
- /* wait for DMA engine to become idle */
- while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
- msleep(10);
-
- /* LCD power on */
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
- (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
-
- /* DMA enable */
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
+ atmel_lcdfb_stop(sinfo);
+ atmel_lcdfb_start(sinfo);
}
/**
info->var.xres, info->var.yres,
info->var.xres_virtual, info->var.yres_virtual);
- /* Turn off the LCD controller and the DMA controller */
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
-
- /* Wait for the LCDC core to become idle */
- while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
- msleep(10);
-
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+ atmel_lcdfb_stop_nowait(sinfo);
if (info->var.bits_per_pixel == 1)
info->fix.visual = FB_VISUAL_MONO01;
while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
msleep(10);
- dev_dbg(info->device, " * re-enable DMA engine\n");
- /* ...and enable it with updated configuration */
- lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
-
- dev_dbg(info->device, " * re-enable LCDC core\n");
- lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
- (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
+ atmel_lcdfb_start(sinfo);
dev_dbg(info->device, " * DONE\n");
struct fb_info *info = platform_get_drvdata(pdev);
struct atmel_lcdfb_info *sinfo = info->par;
+ /*
+ * We don't want to handle interrupts while the clock is
+ * stopped. It may take forever.
+ */
+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+
sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(0);
+
+ atmel_lcdfb_stop(sinfo);
atmel_lcdfb_stop_clock(sinfo);
+
return 0;
}
struct atmel_lcdfb_info *sinfo = info->par;
atmel_lcdfb_start_clock(sinfo);
+ atmel_lcdfb_start(sinfo);
if (sinfo->atmel_lcdfb_power_control)
sinfo->atmel_lcdfb_power_control(1);
lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
+
+ /* Enable FIFO & DMA errors */
+ lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI
+ | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
+
return 0;
}
#define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10))
-#define BALLOON_CLASS_NAME "memory"
+#define BALLOON_CLASS_NAME "xen_memory"
struct balloon_stats {
/* We aim for 'current allocation' == 'target allocation'. */
inode->i_ino);
if (err) {
inode_dec_link_count(inode);
- iput(inode);
mutex_unlock(&info->bfs_lock);
+ iput(inode);
return err;
}
mutex_unlock(&info->bfs_lock);
goto bail;
}
- if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno) {
+ if (!ocfs2_sparse_alloc(OCFS2_SB(inode->i_sb)) && !p_blkno && create) {
ocfs2_error(inode->i_sb,
"Inode %llu has a hole at block %llu\n",
(unsigned long long)OCFS2_I(inode)->ip_blkno,
if (!size)
continue;
if (from + size > get_capacity(disk)) {
- printk(KERN_ERR " %s: p%d exceeds device capacity\n",
+ printk(KERN_WARNING
+ "%s: p%d exceeds device capacity\n",
disk->disk_name, p);
- continue;
}
res = add_partition(disk, p, from, size, state->parts[p].flags);
if (res) {
for (tmp = dir->subdir; tmp; tmp = tmp->next)
if (strcmp(tmp->name, dp->name) == 0) {
- printk(KERN_WARNING "proc_dir_entry '%s' already "
- "registered\n", dp->name);
+ printk(KERN_WARNING "proc_dir_entry '%s/%s' already registered\n",
+ dir->name, dp->name);
dump_stack();
break;
}
"SReclaimable: %8lu kB\n"
"SUnreclaim: %8lu kB\n"
"PageTables: %8lu kB\n"
+#ifdef CONFIG_QUICKLIST
+ "Quicklists: %8lu kB\n"
+#endif
"NFS_Unstable: %8lu kB\n"
"Bounce: %8lu kB\n"
"WritebackTmp: %8lu kB\n"
"Committed_AS: %8lu kB\n"
"VmallocTotal: %8lu kB\n"
"VmallocUsed: %8lu kB\n"
- "VmallocChunk: %8lu kB\n"
- "Quicklists: %8lu kB\n",
+ "VmallocChunk: %8lu kB\n",
K(i.totalram),
K(i.freeram),
K(i.bufferram),
K(global_page_state(NR_SLAB_RECLAIMABLE)),
K(global_page_state(NR_SLAB_UNRECLAIMABLE)),
K(global_page_state(NR_PAGETABLE)),
+#ifdef CONFIG_QUICKLIST
+ K(quicklist_total_size()),
+#endif
K(global_page_state(NR_UNSTABLE_NFS)),
K(global_page_state(NR_BOUNCE)),
K(global_page_state(NR_WRITEBACK_TEMP)),
K(committed),
(unsigned long)VMALLOC_TOTAL >> 10,
vmi.used >> 10,
- vmi.largest_chunk >> 10,
- K(quicklist_total_size())
+ vmi.largest_chunk >> 10
);
len += hugetlb_report_meminfo(page + len);
int subtract_lebs;
long long available;
- /*
- * Force the amount available to the total size reported if the used
- * space is zero.
- */
- if (c->lst.total_used <= UBIFS_INO_NODE_SZ &&
- c->budg_data_growth + c->budg_dd_growth == 0) {
- /* Do the same calculation as for c->block_cnt */
- available = c->main_lebs - 2;
- available *= c->leb_size - c->dark_wm;
- return available;
- }
-
available = c->main_bytes - c->lst.total_used;
/*
}
/**
- * ubifs_budg_get_free_space - return amount of free space.
+ * ubifs_reported_space - calculate reported free space.
+ * @c: the UBIFS file-system description object
+ * @free: amount of free space
+ *
+ * This function calculates amount of free space which will be reported to
+ * user-space. User-space application tend to expect that if the file-system
+ * (e.g., via the 'statfs()' call) reports that it has N bytes available, they
+ * are able to write a file of size N. UBIFS attaches node headers to each data
+ * node and it has to write indexind nodes as well. This introduces additional
+ * overhead, and UBIFS it has to report sligtly less free space to meet the
+ * above expectetion.
+ *
+ * This function assumes free space is made up of uncompressed data nodes and
+ * full index nodes (one per data node, tripled because we always allow enough
+ * space to write the index thrice).
+ *
+ * Note, the calculation is pessimistic, which means that most of the time
+ * UBIFS reports less space than it actually has.
+ */
+long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free)
+{
+ int divisor, factor, f;
+
+ /*
+ * Reported space size is @free * X, where X is UBIFS block size
+ * divided by UBIFS block size + all overhead one data block
+ * introduces. The overhead is the node header + indexing overhead.
+ *
+ * Indexing overhead calculations are based on the following formula:
+ * I = N/(f - 1) + 1, where I - number of indexing nodes, N - number
+ * of data nodes, f - fanout. Because effective UBIFS fanout is twice
+ * as less than maximum fanout, we assume that each data node
+ * introduces 3 * @c->max_idx_node_sz / (@c->fanout/2 - 1) bytes.
+ * Note, the multiplier 3 is because UBIFS reseves thrice as more space
+ * for the index.
+ */
+ f = c->fanout > 3 ? c->fanout >> 1 : 2;
+ factor = UBIFS_BLOCK_SIZE;
+ divisor = UBIFS_MAX_DATA_NODE_SZ;
+ divisor += (c->max_idx_node_sz * 3) / (f - 1);
+ free *= factor;
+ do_div(free, divisor);
+ return free;
+}
+
+/**
+ * ubifs_get_free_space - return amount of free space.
* @c: UBIFS file-system description object
*
- * This function returns amount of free space on the file-system.
+ * This function calculates amount of free space to report to user-space.
+ *
+ * Because UBIFS may introduce substantial overhead (the index, node headers,
+ * alighment, wastage at the end of eraseblocks, etc), it cannot report real
+ * amount of free flash space it has (well, because not all dirty space is
+ * reclamable, UBIFS does not actually know the real amount). If UBIFS did so,
+ * it would bread user expectetion about what free space is. Users seem to
+ * accustomed to assume that if the file-system reports N bytes of free space,
+ * they would be able to fit a file of N bytes to the FS. This almost works for
+ * traditional file-systems, because they have way less overhead than UBIFS.
+ * So, to keep users happy, UBIFS tries to take the overhead into account.
*/
-long long ubifs_budg_get_free_space(struct ubifs_info *c)
+long long ubifs_get_free_space(struct ubifs_info *c)
{
- int min_idx_lebs, rsvd_idx_lebs;
+ int min_idx_lebs, rsvd_idx_lebs, lebs;
long long available, outstanding, free;
- /* Do exactly the same calculations as in 'do_budget_space()' */
spin_lock(&c->space_lock);
min_idx_lebs = ubifs_calc_min_idx_lebs(c);
+ outstanding = c->budg_data_growth + c->budg_dd_growth;
- if (min_idx_lebs > c->lst.idx_lebs)
- rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs;
- else
- rsvd_idx_lebs = 0;
-
- if (rsvd_idx_lebs > c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt
- - c->lst.taken_empty_lebs) {
+ /*
+ * Force the amount available to the total size reported if the used
+ * space is zero.
+ */
+ if (c->lst.total_used <= UBIFS_INO_NODE_SZ && !outstanding) {
spin_unlock(&c->space_lock);
- return 0;
+ return (long long)c->block_cnt << UBIFS_BLOCK_SHIFT;
}
available = ubifs_calc_available(c, min_idx_lebs);
- outstanding = c->budg_data_growth + c->budg_dd_growth;
- c->min_idx_lebs = min_idx_lebs;
+
+ /*
+ * When reporting free space to user-space, UBIFS guarantees that it is
+ * possible to write a file of free space size. This means that for
+ * empty LEBs we may use more precise calculations than
+ * 'ubifs_calc_available()' is using. Namely, we know that in empty
+ * LEBs we would waste only @c->leb_overhead bytes, not @c->dark_wm.
+ * Thus, amend the available space.
+ *
+ * Note, the calculations below are similar to what we have in
+ * 'do_budget_space()', so refer there for comments.
+ */
+ if (min_idx_lebs > c->lst.idx_lebs)
+ rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs;
+ else
+ rsvd_idx_lebs = 0;
+ lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt -
+ c->lst.taken_empty_lebs;
+ lebs -= rsvd_idx_lebs;
+ available += lebs * (c->dark_wm - c->leb_overhead);
spin_unlock(&c->space_lock);
if (available > outstanding)
if (err) {
if (err != -ENOSPC)
return err;
- err = 0;
budgeted = 0;
}
int err;
struct ubifs_budget_req req;
loff_t old_size = inode->i_size, new_size = attr->ia_size;
- int offset = new_size & (UBIFS_BLOCK_SIZE - 1);
+ int offset = new_size & (UBIFS_BLOCK_SIZE - 1), budgeted = 1;
struct ubifs_inode *ui = ubifs_inode(inode);
dbg_gen("ino %lu, size %lld -> %lld", inode->i_ino, old_size, new_size);
/* A funny way to budget for truncation node */
req.dirtied_ino_d = UBIFS_TRUN_NODE_SZ;
err = ubifs_budget_space(c, &req);
- if (err)
- return err;
+ if (err) {
+ /*
+ * Treat truncations to zero as deletion and always allow them,
+ * just like we do for '->unlink()'.
+ */
+ if (new_size || err != -ENOSPC)
+ return err;
+ budgeted = 0;
+ }
err = vmtruncate(inode, new_size);
if (err)
err = ubifs_jnl_truncate(c, inode, old_size, new_size);
mutex_unlock(&ui->ui_mutex);
out_budg:
- ubifs_release_budget(c, &req);
+ if (budgeted)
+ ubifs_release_budget(c, &req);
+ else {
+ c->nospace = c->nospace_rp = 0;
+ smp_wmb();
+ }
return err;
}
* dirty index heap, and it falls-back to LPT scanning if the heaps are empty
* or do not have an LEB which satisfies the @min_space criteria.
*
- * Note:
- * o LEBs which have less than dead watermark of dirty space are never picked
- * by this function;
- *
- * Returns zero and the LEB properties of
- * found dirty LEB in case of success, %-ENOSPC if no dirty LEB was found and a
- * negative error code in case of other failures. The returned LEB is marked as
- * "taken".
+ * Note, LEBs which have less than dead watermark of free + dirty space are
+ * never picked by this function.
*
* The additional @pick_free argument controls if this function has to return a
* free or freeable LEB if one is present. For example, GC must to set it to %1,
*
* In addition @pick_free is set to %2 by the recovery process in order to
* recover gc_lnum in which case an index LEB must not be returned.
+ *
+ * This function returns zero and the LEB properties of found dirty LEB in case
+ * of success, %-ENOSPC if no dirty LEB was found and a negative error code in
+ * case of other failures. The returned LEB is marked as "taken".
*/
int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp,
int min_space, int pick_free)
int lebs, rsvd_idx_lebs = 0;
spin_lock(&c->space_lock);
- lebs = c->lst.empty_lebs;
+ lebs = c->lst.empty_lebs + c->idx_gc_cnt;
lebs += c->freeable_cnt - c->lst.taken_empty_lebs;
/*
lp = idx_lp;
if (lp) {
- ubifs_assert(lp->dirty >= c->dead_wm);
+ ubifs_assert(lp->free + lp->dirty >= c->dead_wm);
goto found;
}
if (err)
goto out;
+ /* Allow for races with TNC */
+ c->gced_lnum = lnum;
+ smp_wmb();
+ c->gc_seq += 1;
+ smp_wmb();
+
if (c->gc_lnum == -1) {
c->gc_lnum = lnum;
err = LEB_RETAINED;
return (void *)((struct ubifs_branch *)idx->branches)->key;
}
-/**
- * ubifs_reported_space - calculate reported free space.
- * @c: the UBIFS file-system description object
- * @free: amount of free space
- *
- * This function calculates amount of free space which will be reported to
- * user-space. User-space application tend to expect that if the file-system
- * (e.g., via the 'statfs()' call) reports that it has N bytes available, they
- * are able to write a file of size N. UBIFS attaches node headers to each data
- * node and it has to write indexind nodes as well. This introduces additional
- * overhead, and UBIFS it has to report sligtly less free space to meet the
- * above expectetion.
- *
- * This function assumes free space is made up of uncompressed data nodes and
- * full index nodes (one per data node, doubled because we always allow enough
- * space to write the index twice).
- *
- * Note, the calculation is pessimistic, which means that most of the time
- * UBIFS reports less space than it actually has.
- */
-static inline long long ubifs_reported_space(const struct ubifs_info *c,
- uint64_t free)
-{
- int divisor, factor;
-
- divisor = UBIFS_MAX_DATA_NODE_SZ + (c->max_idx_node_sz * 3);
- factor = UBIFS_MAX_DATA_NODE_SZ - UBIFS_DATA_NODE_SZ;
- do_div(free, divisor);
-
- return free * factor;
-}
-
/**
* ubifs_current_time - round current time to time granularity.
* @inode: inode
current_fs_time(inode->i_sb) : CURRENT_TIME_SEC;
}
+/**
+ * ubifs_tnc_lookup - look up a file-system node.
+ * @c: UBIFS file-system description object
+ * @key: node key to lookup
+ * @node: the node is returned here
+ *
+ * This function look up and reads node with key @key. The caller has to make
+ * sure the @node buffer is large enough to fit the node. Returns zero in case
+ * of success, %-ENOENT if the node was not found, and a negative error code in
+ * case of failure.
+ */
+static inline int ubifs_tnc_lookup(struct ubifs_info *c,
+ const union ubifs_key *key, void *node)
+{
+ return ubifs_tnc_locate(c, key, node, NULL, NULL);
+}
+
#endif /* __UBIFS_MISC_H__ */
{
struct ubifs_info *c = dentry->d_sb->s_fs_info;
unsigned long long free;
+ __le32 *uuid = (__le32 *)c->uuid;
- free = ubifs_budg_get_free_space(c);
+ free = ubifs_get_free_space(c);
dbg_gen("free space %lld bytes (%lld blocks)",
free, free >> UBIFS_BLOCK_SHIFT);
buf->f_files = 0;
buf->f_ffree = 0;
buf->f_namelen = UBIFS_MAX_NLEN;
-
+ buf->f_fsid.val[0] = le32_to_cpu(uuid[0]) ^ le32_to_cpu(uuid[2]);
+ buf->f_fsid.val[1] = le32_to_cpu(uuid[1]) ^ le32_to_cpu(uuid[3]);
return 0;
}
c->dead_wm = ALIGN(MIN_WRITE_SZ, c->min_io_size);
c->dark_wm = ALIGN(UBIFS_MAX_NODE_SZ, c->min_io_size);
+ /*
+ * Calculate how many bytes would be wasted at the end of LEB if it was
+ * fully filled with data nodes of maximum size. This is used in
+ * calculations when reporting free space.
+ */
+ c->leb_overhead = c->leb_size % UBIFS_MAX_DATA_NODE_SZ;
return 0;
}
* internally because it does not make much sense for UBIFS, but it is
* necessary to report something for the 'statfs()' call.
*
- * Subtract the LEB reserved for GC and the LEB which is reserved for
- * deletions.
- *
- * Review 'ubifs_calc_available()' if changing this calculation.
+ * Subtract the LEB reserved for GC, the LEB which is reserved for
+ * deletions, and assume only one journal head is available.
*/
- tmp64 = c->main_lebs - 2;
- tmp64 *= (uint64_t)c->leb_size - c->dark_wm;
+ tmp64 = c->main_lebs - 2 - c->jhead_cnt + 1;
+ tmp64 *= (uint64_t)c->leb_size - c->leb_overhead;
tmp64 = ubifs_reported_space(c, tmp64);
c->block_cnt = tmp64 >> UBIFS_BLOCK_SHIFT;
if (keys_cmp(c, key, &node_key) != 0)
ret = 0;
}
- if (ret == 0)
+ if (ret == 0 && c->replaying)
dbg_mnt("dangling branch LEB %d:%d len %d, key %s",
zbr->lnum, zbr->offs, zbr->len, DBGKEY(key));
return ret;
}
/**
- * ubifs_tnc_lookup - look up a file-system node.
+ * maybe_leb_gced - determine if a LEB may have been garbage collected.
* @c: UBIFS file-system description object
- * @key: node key to lookup
- * @node: the node is returned here
+ * @lnum: LEB number
+ * @gc_seq1: garbage collection sequence number
*
- * This function look up and reads node with key @key. The caller has to make
- * sure the @node buffer is large enough to fit the node. Returns zero in case
- * of success, %-ENOENT if the node was not found, and a negative error code in
- * case of failure.
+ * This function determines if @lnum may have been garbage collected since
+ * sequence number @gc_seq1. If it may have been then %1 is returned, otherwise
+ * %0 is returned.
*/
-int ubifs_tnc_lookup(struct ubifs_info *c, const union ubifs_key *key,
- void *node)
+static int maybe_leb_gced(struct ubifs_info *c, int lnum, int gc_seq1)
{
- int found, n, err;
- struct ubifs_znode *znode;
- struct ubifs_zbranch zbr, *zt;
+ int gc_seq2, gced_lnum;
- mutex_lock(&c->tnc_mutex);
- found = ubifs_lookup_level0(c, key, &znode, &n);
- if (!found) {
- err = -ENOENT;
- goto out;
- } else if (found < 0) {
- err = found;
- goto out;
- }
- zt = &znode->zbranch[n];
- if (is_hash_key(c, key)) {
- /*
- * In this case the leaf node cache gets used, so we pass the
- * address of the zbranch and keep the mutex locked
- */
- err = tnc_read_node_nm(c, zt, node);
- goto out;
- }
- zbr = znode->zbranch[n];
- mutex_unlock(&c->tnc_mutex);
-
- err = ubifs_tnc_read_node(c, &zbr, node);
- return err;
-
-out:
- mutex_unlock(&c->tnc_mutex);
- return err;
+ gced_lnum = c->gced_lnum;
+ smp_rmb();
+ gc_seq2 = c->gc_seq;
+ /* Same seq means no GC */
+ if (gc_seq1 == gc_seq2)
+ return 0;
+ /* Different by more than 1 means we don't know */
+ if (gc_seq1 + 1 != gc_seq2)
+ return 1;
+ /*
+ * We have seen the sequence number has increased by 1. Now we need to
+ * be sure we read the right LEB number, so read it again.
+ */
+ smp_rmb();
+ if (gced_lnum != c->gced_lnum)
+ return 1;
+ /* Finally we can check lnum */
+ if (gced_lnum == lnum)
+ return 1;
+ return 0;
}
/**
* @lnum: LEB number is returned here
* @offs: offset is returned here
*
- * This function is the same as 'ubifs_tnc_lookup()' but it returns the node
- * location also. See 'ubifs_tnc_lookup()'.
+ * This function look up and reads node with key @key. The caller has to make
+ * sure the @node buffer is large enough to fit the node. Returns zero in case
+ * of success, %-ENOENT if the node was not found, and a negative error code in
+ * case of failure. The node location can be returned in @lnum and @offs.
*/
int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key,
void *node, int *lnum, int *offs)
{
- int found, n, err;
+ int found, n, err, safely = 0, gc_seq1;
struct ubifs_znode *znode;
struct ubifs_zbranch zbr, *zt;
+again:
mutex_lock(&c->tnc_mutex);
found = ubifs_lookup_level0(c, key, &znode, &n);
if (!found) {
goto out;
}
zt = &znode->zbranch[n];
+ if (lnum) {
+ *lnum = zt->lnum;
+ *offs = zt->offs;
+ }
if (is_hash_key(c, key)) {
/*
* In this case the leaf node cache gets used, so we pass the
* address of the zbranch and keep the mutex locked
*/
- *lnum = zt->lnum;
- *offs = zt->offs;
err = tnc_read_node_nm(c, zt, node);
goto out;
}
+ if (safely) {
+ err = ubifs_tnc_read_node(c, zt, node);
+ goto out;
+ }
+ /* Drop the TNC mutex prematurely and race with garbage collection */
zbr = znode->zbranch[n];
+ gc_seq1 = c->gc_seq;
mutex_unlock(&c->tnc_mutex);
- *lnum = zbr.lnum;
- *offs = zbr.offs;
+ if (ubifs_get_wbuf(c, zbr.lnum)) {
+ /* We do not GC journal heads */
+ err = ubifs_tnc_read_node(c, &zbr, node);
+ return err;
+ }
- err = ubifs_tnc_read_node(c, &zbr, node);
- return err;
+ err = fallible_read_node(c, key, &zbr, node);
+ if (maybe_leb_gced(c, zbr.lnum, gc_seq1)) {
+ /*
+ * The node may have been GC'ed out from under us so try again
+ * while keeping the TNC mutex locked.
+ */
+ safely = 1;
+ goto again;
+ }
+ return 0;
out:
mutex_unlock(&c->tnc_mutex);
{
int found, n, err;
struct ubifs_znode *znode;
- struct ubifs_zbranch zbr;
dbg_tnc("name '%.*s' key %s", nm->len, nm->name, DBGKEY(key));
mutex_lock(&c->tnc_mutex);
goto out_unlock;
}
- zbr = znode->zbranch[n];
- mutex_unlock(&c->tnc_mutex);
-
- err = tnc_read_node_nm(c, &zbr, node);
- return err;
+ err = tnc_read_node_nm(c, &znode->zbranch[n], node);
out_unlock:
mutex_unlock(&c->tnc_mutex);
#define UBIFS_SK_LEN 8
/* Minimum index tree fanout */
-#define UBIFS_MIN_FANOUT 2
+#define UBIFS_MIN_FANOUT 3
/* Maximum number of levels in UBIFS indexing B-tree */
#define UBIFS_MAX_LEVELS 512
* @max_idx_node_sz: maximum indexing node aligned on 8-bytes boundary
* @max_inode_sz: maximum possible inode size in bytes
* @max_znode_sz: size of znode in bytes
+ *
+ * @leb_overhead: how many bytes are wasted in an LEB when it is filled with
+ * data nodes of maximum size - used in free space reporting
* @dead_wm: LEB dead space watermark
* @dark_wm: LEB dark space watermark
* @block_cnt: count of 4KiB blocks on the FS
* @sbuf: a buffer of LEB size used by GC and replay for scanning
* @idx_gc: list of index LEBs that have been garbage collected
* @idx_gc_cnt: number of elements on the idx_gc list
+ * @gc_seq: incremented for every non-index LEB garbage collected
+ * @gced_lnum: last non-index LEB that was garbage collected
*
* @infos_list: links all 'ubifs_info' objects
* @umount_mutex: serializes shrinker and un-mount
int max_idx_node_sz;
long long max_inode_sz;
int max_znode_sz;
+
+ int leb_overhead;
int dead_wm;
int dark_wm;
int block_cnt;
void *sbuf;
struct list_head idx_gc;
int idx_gc_cnt;
+ volatile int gc_seq;
+ volatile int gced_lnum;
struct list_head infos_list;
struct mutex umount_mutex;
struct ubifs_budget_req *req);
void ubifs_cancel_ino_op(struct ubifs_info *c, struct inode *inode,
struct ubifs_budget_req *req);
-long long ubifs_budg_get_free_space(struct ubifs_info *c);
+long long ubifs_get_free_space(struct ubifs_info *c);
int ubifs_calc_min_idx_lebs(struct ubifs_info *c);
void ubifs_convert_page_budget(struct ubifs_info *c);
+long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free);
long long ubifs_calc_available(const struct ubifs_info *c, int min_idx_lebs);
/* find.c */
/* tnc.c */
int ubifs_lookup_level0(struct ubifs_info *c, const union ubifs_key *key,
struct ubifs_znode **zn, int *n);
-int ubifs_tnc_lookup(struct ubifs_info *c, const union ubifs_key *key,
- void *node);
int ubifs_tnc_lookup_nm(struct ubifs_info *c, const union ubifs_key *key,
void *node, const struct qstr *nm);
int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key,
.release = udf_release_file,
.fsync = udf_fsync_file,
.splice_read = generic_file_splice_read,
+ .llseek = generic_file_llseek,
};
const struct inode_operations udf_file_inode_operations = {
*err = -ENOSPC;
iinfo = UDF_I(inode);
- iinfo->i_unique = 0;
- iinfo->i_lenExtents = 0;
- iinfo->i_next_alloc_block = 0;
- iinfo->i_next_alloc_goal = 0;
- iinfo->i_strat4096 = 0;
+ if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
+ iinfo->i_efe = 1;
+ if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
+ sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
+ iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+ sizeof(struct extendedFileEntry),
+ GFP_KERNEL);
+ } else {
+ iinfo->i_efe = 0;
+ iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
+ sizeof(struct fileEntry),
+ GFP_KERNEL);
+ }
+ if (!iinfo->i_ext.i_data) {
+ iput(inode);
+ *err = -ENOMEM;
+ return NULL;
+ }
block = udf_new_block(dir->i_sb, NULL,
dinfo->i_location.partitionReferenceNum,
lvhd->uniqueID = cpu_to_le64(uniqueID);
mark_buffer_dirty(sbi->s_lvid_bh);
}
+ mutex_unlock(&sbi->s_alloc_mutex);
inode->i_mode = mode;
inode->i_uid = current->fsuid;
if (dir->i_mode & S_ISGID) {
iinfo->i_lenEAttr = 0;
iinfo->i_lenAlloc = 0;
iinfo->i_use = 0;
- if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_EXTENDED_FE)) {
- iinfo->i_efe = 1;
- if (UDF_VERS_USE_EXTENDED_FE > sbi->s_udfrev)
- sbi->s_udfrev = UDF_VERS_USE_EXTENDED_FE;
- iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
- sizeof(struct extendedFileEntry),
- GFP_KERNEL);
- } else {
- iinfo->i_efe = 0;
- iinfo->i_ext.i_data = kzalloc(inode->i_sb->s_blocksize -
- sizeof(struct fileEntry),
- GFP_KERNEL);
- }
- if (!iinfo->i_ext.i_data) {
- iput(inode);
- *err = -ENOMEM;
- mutex_unlock(&sbi->s_alloc_mutex);
- return NULL;
- }
if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_AD_IN_ICB))
iinfo->i_alloc_type = ICBTAG_FLAG_AD_IN_ICB;
else if (UDF_QUERY_FLAG(inode->i_sb, UDF_FLAG_USE_SHORT_AD))
iinfo->i_crtime = current_fs_time(inode->i_sb);
insert_inode_hash(inode);
mark_inode_dirty(inode);
- mutex_unlock(&sbi->s_alloc_mutex);
if (DQUOT_ALLOC_INODE(inode)) {
DQUOT_DROP(inode);
extern char __initdata_begin[], __initdata_end[];
extern char __start_rodata[], __end_rodata[];
+/* function descriptor handling (if any). Override
+ * in asm/sections.h */
+#ifndef dereference_function_descriptor
+#define dereference_function_descriptor(p) (p)
+#endif
+
#endif /* _ASM_GENERIC_SECTIONS_H_ */
/* nothing to see, move along */
#include <asm-generic/sections.h>
+#ifdef CONFIG_64BIT
+#undef dereference_function_descriptor
+void *dereference_function_descriptor(void *);
+#endif
+
#endif
*/
extern int blk_verify_command(struct blk_cmd_filter *filter,
unsigned char *cmd, int has_write_perm);
-extern int blk_register_filter(struct gendisk *disk);
-extern void blk_unregister_filter(struct gendisk *disk);
extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
#define MAX_PHYS_SEGMENTS 128
struct resource *parent, resource_size_t start,
resource_size_t n, const char *name);
-#define devm_release_region(start,n) \
+#define devm_release_region(dev, start, n) \
__devm_release_region(dev, &ioport_resource, (start), (n))
-#define devm_release_mem_region(start,n) \
+#define devm_release_mem_region(dev, start, n) \
__devm_release_region(dev, &iomem_resource, (start), (n))
extern void __devm_release_region(struct device *dev, struct resource *parent,
struct ms_status_register {
unsigned char reserved;
unsigned char interrupt;
-#define MEMSTICK_INT_CMDNAK 0x0001
-#define MEMSTICK_INT_IOREQ 0x0008
-#define MEMSTICK_INT_IOBREQ 0x0010
-#define MEMSTICK_INT_BREQ 0x0020
-#define MEMSTICK_INT_ERR 0x0040
-#define MEMSTICK_INT_CED 0x0080
+#define MEMSTICK_INT_CMDNAK 0x01
+#define MEMSTICK_INT_IOREQ 0x08
+#define MEMSTICK_INT_IOBREQ 0x10
+#define MEMSTICK_INT_BREQ 0x20
+#define MEMSTICK_INT_ERR 0x40
+#define MEMSTICK_INT_CED 0x80
unsigned char status0;
-#define MEMSTICK_STATUS0_WP 0x0001
-#define MEMSTICK_STATUS0_SL 0x0002
-#define MEMSTICK_STATUS0_BF 0x0010
-#define MEMSTICK_STATUS0_BE 0x0020
-#define MEMSTICK_STATUS0_FB0 0x0040
-#define MEMSTICK_STATUS0_MB 0x0080
+#define MEMSTICK_STATUS0_WP 0x01
+#define MEMSTICK_STATUS0_SL 0x02
+#define MEMSTICK_STATUS0_BF 0x10
+#define MEMSTICK_STATUS0_BE 0x20
+#define MEMSTICK_STATUS0_FB0 0x40
+#define MEMSTICK_STATUS0_MB 0x80
unsigned char status1;
-#define MEMSTICK_STATUS1_UCFG 0x0001
-#define MEMSTICK_STATUS1_FGER 0x0002
-#define MEMSTICK_STATUS1_UCEX 0x0004
-#define MEMSTICK_STATUS1_EXER 0x0008
-#define MEMSTICK_STATUS1_UCDT 0x0010
-#define MEMSTICK_STATUS1_DTER 0x0020
-#define MEMSTICK_STATUS1_FBI 0x0040
-#define MEMSTICK_STATUS1_MB 0x0080
+#define MEMSTICK_STATUS1_UCFG 0x01
+#define MEMSTICK_STATUS1_FGER 0x02
+#define MEMSTICK_STATUS1_UCEX 0x04
+#define MEMSTICK_STATUS1_EXER 0x08
+#define MEMSTICK_STATUS1_UCDT 0x10
+#define MEMSTICK_STATUS1_DTER 0x20
+#define MEMSTICK_STATUS1_FB1 0x40
+#define MEMSTICK_STATUS1_MB 0x80
} __attribute__((packed));
struct ms_id_register {
struct ms_param_register {
unsigned char system;
-#define MEMSTICK_SYS_ATEN 0xc0
-#define MEMSTICK_SYS_BAMD 0x80
#define MEMSTICK_SYS_PAM 0x08
+#define MEMSTICK_SYS_BAMD 0x80
unsigned char block_address_msb;
unsigned short block_address;
unsigned char cp;
-#define MEMSTICK_CP_BLOCK 0x0000
-#define MEMSTICK_CP_PAGE 0x0020
-#define MEMSTICK_CP_EXTRA 0x0040
-#define MEMSTICK_CP_OVERWRITE 0x0080
+#define MEMSTICK_CP_BLOCK 0x00
+#define MEMSTICK_CP_PAGE 0x20
+#define MEMSTICK_CP_EXTRA 0x40
+#define MEMSTICK_CP_OVERWRITE 0x80
unsigned char page_address;
} __attribute__((packed));
struct ms_extra_data_register {
unsigned char overwrite_flag;
-#define MEMSTICK_OVERWRITE_UPDATA 0x0010
-#define MEMSTICK_OVERWRITE_PAGE 0x0060
-#define MEMSTICK_OVERWRITE_BLOCK 0x0080
+#define MEMSTICK_OVERWRITE_UDST 0x10
+#define MEMSTICK_OVERWRITE_PGST1 0x20
+#define MEMSTICK_OVERWRITE_PGST0 0x40
+#define MEMSTICK_OVERWRITE_BKST 0x80
unsigned char management_flag;
-#define MEMSTICK_MANAGEMENT_SYSTEM 0x0004
-#define MEMSTICK_MANAGEMENT_TRANS_TABLE 0x0008
-#define MEMSTICK_MANAGEMENT_COPY 0x0010
-#define MEMSTICK_MANAGEMENT_ACCESS 0x0020
+#define MEMSTICK_MANAGEMENT_SYSFLG 0x04
+#define MEMSTICK_MANAGEMENT_ATFLG 0x08
+#define MEMSTICK_MANAGEMENT_SCMS1 0x10
+#define MEMSTICK_MANAGEMENT_SCMS0 0x20
unsigned short logical_address;
} __attribute__((packed));
struct mspro_param_register {
unsigned char system;
-#define MEMSTICK_SYS_SERIAL 0x80
#define MEMSTICK_SYS_PAR4 0x00
#define MEMSTICK_SYS_PAR8 0x40
+#define MEMSTICK_SYS_SERIAL 0x80
unsigned short data_count;
unsigned int data_address;
unsigned char w_length;
} __attribute__((packed));
-enum {
+enum memstick_tpc {
MS_TPC_READ_MG_STATUS = 0x01,
MS_TPC_READ_LONG_DATA = 0x02,
MS_TPC_READ_SHORT_DATA = 0x03,
MS_TPC_SET_CMD = 0x0e
};
-enum {
+enum memstick_command {
MS_CMD_BLOCK_END = 0x33,
MS_CMD_RESET = 0x3c,
MS_CMD_BLOCK_WRITE = 0x55,
/*** Driver structures and functions ***/
-#define MEMSTICK_PART_SHIFT 3
-
enum memstick_param { MEMSTICK_POWER = 1, MEMSTICK_INTERFACE };
#define MEMSTICK_POWER_OFF 0
struct memstick_host;
struct memstick_driver;
+struct memstick_device_id {
+ unsigned char match_flags;
#define MEMSTICK_MATCH_ALL 0x01
+ unsigned char type;
#define MEMSTICK_TYPE_LEGACY 0xff
#define MEMSTICK_TYPE_DUO 0x00
#define MEMSTICK_TYPE_PRO 0x01
+ unsigned char category;
#define MEMSTICK_CATEGORY_STORAGE 0xff
#define MEMSTICK_CATEGORY_STORAGE_DUO 0x00
+#define MEMSTICK_CATEGORY_IO 0x01
+#define MEMSTICK_CATEGORY_IO_PRO 0x10
-#define MEMSTICK_CLASS_GENERIC 0xff
-#define MEMSTICK_CLASS_GENERIC_DUO 0x00
-
-
-struct memstick_device_id {
- unsigned char match_flags;
- unsigned char type;
- unsigned char category;
unsigned char class;
+#define MEMSTICK_CLASS_FLASH 0xff
+#define MEMSTICK_CLASS_DUO 0x00
+#define MEMSTICK_CLASS_ROM 0x01
+#define MEMSTICK_CLASS_RO 0x02
+#define MEMSTICK_CLASS_WP 0x03
};
struct memstick_request {
void memstick_resume_host(struct memstick_host *host);
void memstick_init_req_sg(struct memstick_request *mrq, unsigned char tpc,
- struct scatterlist *sg);
+ const struct scatterlist *sg);
void memstick_init_req(struct memstick_request *mrq, unsigned char tpc,
- void *buf, size_t length);
+ const void *buf, size_t length);
int memstick_next_req(struct memstick_host *host,
struct memstick_request **mrq);
void memstick_new_req(struct memstick_host *host);
*
* This function returns the next zone at or below a given zone index that is
* within the allowed nodemask using a cursor as the starting point for the
- * search. The zoneref returned is a cursor that is used as the next starting
- * point for future calls to next_zones_zonelist().
+ * search. The zoneref returned is a cursor that represents the current zone
+ * being examined. It should be advanced by one before calling
+ * next_zones_zonelist again.
*/
struct zoneref *next_zones_zonelist(struct zoneref *z,
enum zone_type highest_zoneidx,
*
* This function returns the first zone at or below a given zone index that is
* within the allowed nodemask. The zoneref returned is a cursor that can be
- * used to iterate the zonelist with next_zones_zonelist. The cursor should
- * not be used by the caller as it does not match the value of the zone
- * returned.
+ * used to iterate the zonelist with next_zones_zonelist by advancing it by
+ * one before calling.
*/
static inline struct zoneref *first_zones_zonelist(struct zonelist *zonelist,
enum zone_type highest_zoneidx,
#define for_each_zone_zonelist_nodemask(zone, z, zlist, highidx, nodemask) \
for (z = first_zones_zonelist(zlist, highidx, nodemask, &zone); \
zone; \
- z = next_zones_zonelist(z, highidx, nodemask, &zone)) \
+ z = next_zones_zonelist(++z, highidx, nodemask, &zone)) \
/**
* for_each_zone_zonelist - helper macro to iterate over valid zones in a zonelist at or below a given zone index
__u8 scsi_lun[8];
};
+/*
+ * The Well Known LUNS (SAM-3) in our int representation of a LUN
+ */
+#define SCSI_W_LUN_BASE 0xc100
+#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1)
+#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2)
+#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3)
+
+static inline int scsi_is_wlun(unsigned int lun)
+{
+ return (lun & 0xff00) == SCSI_W_LUN_BASE;
+}
+
+
/*
* MESSAGE CODES
*/
/**
* update_tasks_cpumask - Update the cpumasks of tasks in the cpuset.
* @cs: the cpuset in which each task's cpus_allowed mask needs to be changed
+ * @heap: if NULL, defer allocating heap memory to cgroup_scan_tasks()
*
* Called with cgroup_mutex held
*
* The cgroup_scan_tasks() function will scan all the tasks in a cgroup,
* calling callback functions for each.
*
- * Return 0 if successful, -errno if not.
+ * No return value. It's guaranteed that cgroup_scan_tasks() always returns 0
+ * if @heap != NULL.
*/
-static int update_tasks_cpumask(struct cpuset *cs)
+static void update_tasks_cpumask(struct cpuset *cs, struct ptr_heap *heap)
{
struct cgroup_scanner scan;
- struct ptr_heap heap;
- int retval;
-
- /*
- * cgroup_scan_tasks() will initialize heap->gt for us.
- * heap_init() is still needed here for we should not change
- * cs->cpus_allowed when heap_init() fails.
- */
- retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
- if (retval)
- return retval;
scan.cg = cs->css.cgroup;
scan.test_task = cpuset_test_cpumask;
scan.process_task = cpuset_change_cpumask;
- scan.heap = &heap;
- retval = cgroup_scan_tasks(&scan);
-
- heap_free(&heap);
- return retval;
+ scan.heap = heap;
+ cgroup_scan_tasks(&scan);
}
/**
*/
static int update_cpumask(struct cpuset *cs, const char *buf)
{
+ struct ptr_heap heap;
struct cpuset trialcs;
int retval;
int is_load_balanced;
if (cpus_equal(cs->cpus_allowed, trialcs.cpus_allowed))
return 0;
+ retval = heap_init(&heap, PAGE_SIZE, GFP_KERNEL, NULL);
+ if (retval)
+ return retval;
+
is_load_balanced = is_sched_load_balance(&trialcs);
mutex_lock(&callback_mutex);
* Scan tasks in the cpuset, and update the cpumasks of any
* that need an update.
*/
- retval = update_tasks_cpumask(cs);
- if (retval < 0)
- return retval;
+ update_tasks_cpumask(cs, &heap);
+
+ heap_free(&heap);
if (is_load_balanced)
async_rebuild_sched_domains();
nodes_empty(cp->mems_allowed))
remove_tasks_in_empty_cpuset(cp);
else {
- update_tasks_cpumask(cp);
+ update_tasks_cpumask(cp, NULL);
update_tasks_nodemask(cp, &oldmems);
}
}
* and emit a warning.
*/
if (++i > 2) {
- printk(KERN_WARNING "CE: __tick_program_event of %s is "
- "stuck %llx %llx\n", dev->name ? dev->name : "?",
- now.tv64, expires.tv64);
- printk(KERN_WARNING
- "CE: increasing min_delta_ns %ld to %ld nsec\n",
- dev->min_delta_ns, dev->min_delta_ns << 1);
- WARN_ON(1);
-
- /* Double the min. delta and try again */
+ /* Increase the min. delta and try again */
if (!dev->min_delta_ns)
dev->min_delta_ns = 5000;
else
- dev->min_delta_ns <<= 1;
+ dev->min_delta_ns += dev->min_delta_ns >> 1;
+
+ printk(KERN_WARNING
+ "CE: %s increasing min_delta_ns to %lu nsec\n",
+ dev->name ? dev->name : "?",
+ dev->min_delta_ns << 1);
+
i = 0;
}
{
unsigned int offset = 0;
struct sg_mapping_iter miter;
+ unsigned long flags;
sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
+ local_irq_save(flags);
+
while (sg_miter_next(&miter) && offset < buflen) {
unsigned int len;
sg_miter_stop(&miter);
+ local_irq_restore(flags);
return offset;
}
* the lowest available address range.
*/
dma_addr_t handle;
- handle = swiotlb_map_single(NULL, NULL, size, DMA_FROM_DEVICE);
+ handle = swiotlb_map_single(hwdev, NULL, size, DMA_FROM_DEVICE);
if (swiotlb_dma_mapping_error(hwdev, handle))
return NULL;
#include <asm/page.h> /* for PAGE_SIZE */
#include <asm/div64.h>
+#include <asm/sections.h> /* for dereference_function_descriptor() */
/* Works only for digits and letters, but small and fast */
#define TOLOWER(x) ((x) | 0x20)
return buf;
}
-static inline void *dereference_function_descriptor(void *ptr)
-{
-#if defined(CONFIG_IA64) || defined(CONFIG_PPC64)
- void *p;
- if (!probe_kernel_address(ptr, p))
- ptr = p;
-#endif
- return ptr;
-}
-
static char *symbol_string(char *buf, char *end, void *ptr, int field_width, int precision, int flags)
{
unsigned long value = (unsigned long) ptr;
(z->zone && !zref_in_nodemask(z, nodes)))
z++;
- *zone = zonelist_zone(z++);
+ *zone = zonelist_zone(z);
return z;
}
projects / linux-2.6 / commitdiff