]> err.no Git - linux-2.6/commitdiff
powerpc: Fix interrupt values for DMA2 in MPC8610 HPCD device tree
authorTimur Tabi <timur@freescale.com>
Tue, 9 Sep 2008 19:43:39 +0000 (14:43 -0500)
committerPaul Mackerras <paulus@samba.org>
Tue, 16 Sep 2008 21:40:05 +0000 (14:40 -0700)
For Freescale 8xxx devices that use an MPIC, the interrupt numbers in
the device tree must be 16 greater than the values documented in the
reference manual.  In these chips, the MPIC is wired to use the first
16 numbers for external interrupts, but the documentation numbers
internal interrupts from 0.

In the MPC8610 HPCD device tree, the interrupt properties for the DMA
channels for DMA2 were not the adjusted values.  This fixes that.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
arch/powerpc/boot/dts/mpc8610_hpcd.dts

index 3b3a1062cb250886e7d056169ab5e343afe14d5d..584a4f184eb26cddbac0d50c7feb52f406ab7e05 100644 (file)
                                cell-index = <0>;
                                reg = <0x0 0x80>;
                                interrupt-parent = <&mpic>;
-                               interrupts = <60 2>;
+                               interrupts = <76 2>;
                        };
                        dma-channel@1 {
                                compatible = "fsl,mpc8610-dma-channel",
                                cell-index = <1>;
                                reg = <0x80 0x80>;
                                interrupt-parent = <&mpic>;
-                               interrupts = <61 2>;
+                               interrupts = <77 2>;
                        };
                        dma-channel@2 {
                                compatible = "fsl,mpc8610-dma-channel",
                                cell-index = <2>;
                                reg = <0x100 0x80>;
                                interrupt-parent = <&mpic>;
-                               interrupts = <62 2>;
+                               interrupts = <78 2>;
                        };
                        dma-channel@3 {
                                compatible = "fsl,mpc8610-dma-channel",
                                cell-index = <3>;
                                reg = <0x180 0x80>;
                                interrupt-parent = <&mpic>;
-                               interrupts = <63 2>;
+                               interrupts = <79 2>;
                        };
                };