]> err.no Git - linux-2.6/commitdiff
[watchdog] hpwdt: fix use of inline assembly
authorLinus Torvalds <torvalds@linux-foundation.org>
Fri, 20 Jun 2008 19:19:28 +0000 (12:19 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Fri, 20 Jun 2008 19:25:34 +0000 (12:25 -0700)
The inline assembly in drivers/watchdog/hpwdt.c was incredibly broken,
and included all the function prologue and epilogue stuff, even though
it was itself then inside a C function where the compiler would add its
own prologue and epilogue on top of it all.

This then just _happened_ to work if you had exactly the right compiler
version and exactly the right compiler flags, so that gcc just happened
to not create any prologue at all (the gcc-generated epilogue wouldn't
matter, since it would never be reached).

But the more proper way to fix it is to simply not do this.  Move the
inline asm to the top level, with no surrounding function at all (the
better alternative would be to remove the prologue and make it actually
use proper description of the arguments to the inline asm, but that's a
bigger change than the one I'm willing to make right now).

Tested-by: S.Çağlar Onur <caglar@pardus.org.tr>
Acked-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/watchdog/hpwdt.c

index 2686f3eaeedf4c07f56eeafe21725977cd1a1ddc..eaa3f2a79ff55bebafa7a655092879322d0f7743 100644 (file)
@@ -140,49 +140,53 @@ static struct pci_device_id hpwdt_devices[] = {
 };
 MODULE_DEVICE_TABLE(pci, hpwdt_devices);
 
+extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs, unsigned long *pRomEntry);
+
 #ifndef CONFIG_X86_64
 /* --32 Bit Bios------------------------------------------------------------ */
 
 #define HPWDT_ARCH     32
 
-asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
-                              unsigned long *pRomEntry)
-{
-       asm("pushl       %ebp               \n\t"
-           "movl        %esp, %ebp         \n\t"
-           "pusha                          \n\t"
-           "pushf                          \n\t"
-           "push        %es                \n\t"
-           "push        %ds                \n\t"
-           "pop         %es                \n\t"
-           "movl        8(%ebp),%eax       \n\t"
-           "movl        4(%eax),%ebx       \n\t"
-           "movl        8(%eax),%ecx       \n\t"
-           "movl        12(%eax),%edx      \n\t"
-           "movl        16(%eax),%esi      \n\t"
-           "movl        20(%eax),%edi      \n\t"
-           "movl        (%eax),%eax        \n\t"
-           "push        %cs                \n\t"
-           "call        *12(%ebp)          \n\t"
-           "pushf                          \n\t"
-           "pushl       %eax               \n\t"
-           "movl        8(%ebp),%eax       \n\t"
-           "movl        %ebx,4(%eax)       \n\t"
-           "movl        %ecx,8(%eax)       \n\t"
-           "movl        %edx,12(%eax)      \n\t"
-           "movl        %esi,16(%eax)      \n\t"
-           "movl        %edi,20(%eax)      \n\t"
-           "movw        %ds,24(%eax)       \n\t"
-           "movw        %es,26(%eax)       \n\t"
-           "popl        %ebx               \n\t"
-           "movl        %ebx,(%eax)        \n\t"
-           "popl        %ebx               \n\t"
-           "movl        %ebx,28(%eax)      \n\t"
-           "pop         %es                \n\t"
-           "popf                           \n\t"
-           "popa                           \n\t"
-           "leave                          \n\t" "ret");
-}
+asm(".text                          \n\t"
+    ".align 4                       \n"
+    "asminline_call:                \n\t"
+    "pushl       %ebp               \n\t"
+    "movl        %esp, %ebp         \n\t"
+    "pusha                          \n\t"
+    "pushf                          \n\t"
+    "push        %es                \n\t"
+    "push        %ds                \n\t"
+    "pop         %es                \n\t"
+    "movl        8(%ebp),%eax       \n\t"
+    "movl        4(%eax),%ebx       \n\t"
+    "movl        8(%eax),%ecx       \n\t"
+    "movl        12(%eax),%edx      \n\t"
+    "movl        16(%eax),%esi      \n\t"
+    "movl        20(%eax),%edi      \n\t"
+    "movl        (%eax),%eax        \n\t"
+    "push        %cs                \n\t"
+    "call        *12(%ebp)          \n\t"
+    "pushf                          \n\t"
+    "pushl       %eax               \n\t"
+    "movl        8(%ebp),%eax       \n\t"
+    "movl        %ebx,4(%eax)       \n\t"
+    "movl        %ecx,8(%eax)       \n\t"
+    "movl        %edx,12(%eax)      \n\t"
+    "movl        %esi,16(%eax)      \n\t"
+    "movl        %edi,20(%eax)      \n\t"
+    "movw        %ds,24(%eax)       \n\t"
+    "movw        %es,26(%eax)       \n\t"
+    "popl        %ebx               \n\t"
+    "movl        %ebx,(%eax)        \n\t"
+    "popl        %ebx               \n\t"
+    "movl        %ebx,28(%eax)      \n\t"
+    "pop         %es                \n\t"
+    "popf                           \n\t"
+    "popa                           \n\t"
+    "leave                          \n\t"
+    "ret                            \n\t"
+    ".previous");
+
 
 /*
  *     cru_detect
@@ -333,43 +337,44 @@ static int __devinit detect_cru_service(void)
 
 #define HPWDT_ARCH     64
 
-asmlinkage void asminline_call(struct cmn_registers *pi86Regs,
-                              unsigned long *pRomEntry)
-{
-       asm("pushq      %rbp            \n\t"
-           "movq       %rsp, %rbp      \n\t"
-           "pushq      %rax            \n\t"
-           "pushq      %rbx            \n\t"
-           "pushq      %rdx            \n\t"
-           "pushq      %r12            \n\t"
-           "pushq      %r9             \n\t"
-           "movq       %rsi, %r12      \n\t"
-           "movq       %rdi, %r9       \n\t"
-           "movl       4(%r9),%ebx     \n\t"
-           "movl       8(%r9),%ecx     \n\t"
-           "movl       12(%r9),%edx    \n\t"
-           "movl       16(%r9),%esi    \n\t"
-           "movl       20(%r9),%edi    \n\t"
-           "movl       (%r9),%eax      \n\t"
-           "call       *%r12           \n\t"
-           "pushfq                     \n\t"
-           "popq        %r12           \n\t"
-           "popfq                      \n\t"
-           "movl       %eax, (%r9)     \n\t"
-           "movl       %ebx, 4(%r9)    \n\t"
-           "movl       %ecx, 8(%r9)    \n\t"
-           "movl       %edx, 12(%r9)   \n\t"
-           "movl       %esi, 16(%r9)   \n\t"
-           "movl       %edi, 20(%r9)   \n\t"
-           "movq       %r12, %rax      \n\t"
-           "movl       %eax, 28(%r9)   \n\t"
-           "popq       %r9             \n\t"
-           "popq       %r12            \n\t"
-           "popq       %rdx            \n\t"
-           "popq       %rbx            \n\t"
-           "popq       %rax            \n\t"
-           "leave                      \n\t" "ret");
-}
+asm(".text                      \n\t"
+    ".align 4                   \n"
+    "asminline_call:            \n\t"
+    "pushq      %rbp            \n\t"
+    "movq       %rsp, %rbp      \n\t"
+    "pushq      %rax            \n\t"
+    "pushq      %rbx            \n\t"
+    "pushq      %rdx            \n\t"
+    "pushq      %r12            \n\t"
+    "pushq      %r9             \n\t"
+    "movq       %rsi, %r12      \n\t"
+    "movq       %rdi, %r9       \n\t"
+    "movl       4(%r9),%ebx     \n\t"
+    "movl       8(%r9),%ecx     \n\t"
+    "movl       12(%r9),%edx    \n\t"
+    "movl       16(%r9),%esi    \n\t"
+    "movl       20(%r9),%edi    \n\t"
+    "movl       (%r9),%eax      \n\t"
+    "call       *%r12           \n\t"
+    "pushfq                     \n\t"
+    "popq        %r12           \n\t"
+    "popfq                      \n\t"
+    "movl       %eax, (%r9)     \n\t"
+    "movl       %ebx, 4(%r9)    \n\t"
+    "movl       %ecx, 8(%r9)    \n\t"
+    "movl       %edx, 12(%r9)   \n\t"
+    "movl       %esi, 16(%r9)   \n\t"
+    "movl       %edi, 20(%r9)   \n\t"
+    "movq       %r12, %rax      \n\t"
+    "movl       %eax, 28(%r9)   \n\t"
+    "popq       %r9             \n\t"
+    "popq       %r12            \n\t"
+    "popq       %rdx            \n\t"
+    "popq       %rbx            \n\t"
+    "popq       %rax            \n\t"
+    "leave                      \n\t"
+    "ret                        \n\t"
+    ".previous");
 
 /*
  *     dmi_find_cru