]> err.no Git - linux-2.6/commitdiff
[IA64] Ensure cpu0 can access per-cpu variables in early boot code
authorTony Luck <tony.luck@intel.com>
Tue, 12 Aug 2008 17:34:20 +0000 (10:34 -0700)
committerTony Luck <tony.luck@intel.com>
Tue, 12 Aug 2008 17:34:20 +0000 (10:34 -0700)
ia64 handles per-cpu variables a litle differently from other architectures
in that it maps the physical memory allocated for each cpu at a constant
virtual address (0xffffffffffff0000). This mapping is not enabled until
the architecture specific cpu_init() function is run, which causes problems
since some generic code is run before this point. In particular when
CONFIG_PRINTK_TIME is enabled, the boot cpu will trap on the access to
per-cpu memory at the first printk() call so the boot will fail without
the kernel printing anything to the console.

Fix this by allocating percpu memory for cpu0 in the kernel data section
and doing all initialization to enable percpu access in head.S before
calling any generic code.

Other cpus must take care not to access per-cpu variables too early, but
their code path from start_secondary() to cpu_init() is all in arch/ia64

Signed-off-by: Tony Luck <tony.luck@intel.com>
arch/ia64/kernel/head.S
arch/ia64/kernel/setup.c
arch/ia64/kernel/smpboot.c
arch/ia64/kernel/vmlinux.lds.S
arch/ia64/mm/contig.c
arch/ia64/mm/discontig.c

index 41c712917ff706b595ee1683b3e6fdbcf0b46efe..8bdea8eb62e366abc0350bd53261146d445ab41a 100644 (file)
@@ -359,7 +359,31 @@ start_ap:
        mov ar.rsc=0            // place RSE in enforced lazy mode
        ;;
        loadrs                  // clear the dirty partition
-       mov IA64_KR(PER_CPU_DATA)=r0    // clear physical per-CPU base
+       movl r19=__phys_per_cpu_start
+       mov r18=PERCPU_PAGE_SIZE
+       ;;
+#ifndef CONFIG_SMP
+       add r19=r19,r18
+       ;;
+#else
+(isAP) br.few 2f
+       mov r20=r19
+       sub r19=r19,r18
+       ;;
+       shr.u r18=r18,3
+1:
+       ld8 r21=[r20],8;;
+       st8[r19]=r21,8
+       adds r18=-1,r18;;
+       cmp4.lt p7,p6=0,r18
+(p7)   br.cond.dptk.few 1b
+2:
+#endif
+       tpa r19=r19
+       ;;
+       .pred.rel.mutex isBP,isAP
+(isBP) mov IA64_KR(PER_CPU_DATA)=r19   // per-CPU base for cpu0
+(isAP) mov IA64_KR(PER_CPU_DATA)=r0    // clear physical per-CPU base
        ;;
        mov ar.bspstore=r2      // establish the new RSE stack
        ;;
index 593279f33e96e71fae02c6c335f20d2b699e23c6..c27d5b2c182b4c7edd4de5609ce2a2c856a55ddb 100644 (file)
@@ -927,17 +927,19 @@ cpu_init (void)
        if (smp_processor_id() == 0) {
                cpu_set(0, per_cpu(cpu_sibling_map, 0));
                cpu_set(0, cpu_core_map[0]);
+       } else {
+               /*
+                * Set ar.k3 so that assembly code in MCA handler can compute
+                * physical addresses of per cpu variables with a simple:
+                *   phys = ar.k3 + &per_cpu_var
+                * and the alt-dtlb-miss handler can set per-cpu mapping into
+                * the TLB when needed. head.S already did this for cpu0.
+                */
+               ia64_set_kr(IA64_KR_PER_CPU_DATA,
+                           ia64_tpa(cpu_data) - (long) __per_cpu_start);
        }
 #endif
 
-       /*
-        * We set ar.k3 so that assembly code in MCA handler can compute
-        * physical addresses of per cpu variables with a simple:
-        *   phys = ar.k3 + &per_cpu_var
-        */
-       ia64_set_kr(IA64_KR_PER_CPU_DATA,
-                   ia64_tpa(cpu_data) - (long) __per_cpu_start);
-
        get_max_cacheline_size();
 
        /*
index 03f1a9908afc6a3bb547674362cdda704b2ebcc0..b39853a292d5bf27caecb43b5651eff2688b4ae5 100644 (file)
@@ -467,7 +467,9 @@ start_secondary (void *unused)
 {
        /* Early console may use I/O ports */
        ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
+#ifndef CONFIG_PRINTK_TIME
        Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id());
+#endif
        efi_map_pal_code();
        cpu_init();
        preempt_disable();
index 5a77206c2492e0c000140a18a179d7d461ab3dee..de71da811cd68de596ed1c88b0cdcb6b2a714c29 100644 (file)
@@ -215,6 +215,9 @@ SECTIONS
   /* Per-cpu data: */
   percpu : { } :percpu
   . = ALIGN(PERCPU_PAGE_SIZE);
+#ifdef CONFIG_SMP
+  . = . + PERCPU_PAGE_SIZE;    /* cpu0 per-cpu space */
+#endif
   __phys_per_cpu_start = .;
   .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET)
        {
index 798bf9835a519f9ab20c748b6d5056ec69489a66..e566ff43884afcd97b17ff8bb71ebd95deda9ee6 100644 (file)
@@ -163,8 +163,14 @@ per_cpu_init (void)
         * get_zeroed_page().
         */
        if (first_time) {
+               void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+
                first_time=0;
-               for (cpu = 0; cpu < NR_CPUS; cpu++) {
+
+               __per_cpu_offset[0] = (char *) cpu0_data - __per_cpu_start;
+               per_cpu(local_per_cpu_offset, 0) = __per_cpu_offset[0];
+
+               for (cpu = 1; cpu < NR_CPUS; cpu++) {
                        memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start);
                        __per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start;
                        cpu_data += PERCPU_PAGE_SIZE;
@@ -177,7 +183,7 @@ per_cpu_init (void)
 static inline void
 alloc_per_cpu_data(void)
 {
-       cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS,
+       cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS-1,
                                   PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
 }
 #else
index d83125e1ed27b33a1e7ef04794324380dc97f862..78026aabaa7f03671d8b62d304d28d02c3817746 100644 (file)
@@ -143,7 +143,11 @@ static void *per_cpu_node_setup(void *cpu_data, int node)
        int cpu;
 
        for_each_possible_early_cpu(cpu) {
-               if (node == node_cpuid[cpu].nid) {
+               if (cpu == 0) {
+                       void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
+                       __per_cpu_offset[cpu] = (char*)cpu0_data -
+                               __per_cpu_start;
+               } else if (node == node_cpuid[cpu].nid) {
                        memcpy(__va(cpu_data), __phys_per_cpu_start,
                               __per_cpu_end - __per_cpu_start);
                        __per_cpu_offset[cpu] = (char*)__va(cpu_data) -