err.no Git - linux-2.6/blob - drivers/usb/serial/cypress_m8.c

   1 /*
   2  * USB Cypress M8 driver
   3  *
   4  *      Copyright (C) 2004
   5  *          Lonnie Mendez (dignome@gmail.com)
   6  *      Copyright (C) 2003,2004
   7  *          Neil Whelchel (koyama@firstlight.net)
   8  *
   9  *      This program is free software; you can redistribute it and/or modify
  10  *      it under the terms of the GNU General Public License as published by
  11  *      the Free Software Foundation; either version 2 of the License, or
  12  *      (at your option) any later version.
  13  *
  14  * See Documentation/usb/usb-serial.txt for more information on using this driver
  15  *
  16  * See http://geocities.com/i0xox0i for information on this driver and the
  17  * earthmate usb device.
  18  *
  19  *  Lonnie Mendez <dignome@gmail.com>
  20  *  4-29-2005
  21  *      Fixed problem where setting or retreiving the serial config would fail with
  22  *      EPIPE.  Removed CRTS toggling so the driver behaves more like other usbserial
  23  *      adapters.  Issued new interval of 1ms instead of the default 10ms.  As a
  24  *      result, transfer speed has been substantially increased.  From avg. 850bps to
  25  *      avg. 3300bps.  initial termios has also been modified.  Cleaned up code and
  26  *      formatting issues so it is more readable.  Replaced the C++ style comments.
  27  *
  28  *  Lonnie Mendez <dignome@gmail.com>
  29  *  12-15-2004
  30  *      Incorporated write buffering from pl2303 driver.  Fixed bug with line
  31  *      handling so both lines are raised in cypress_open. (was dropping rts)
  32  *      Various code cleanups made as well along with other misc bug fixes.
  33  *
  34  *  Lonnie Mendez <dignome@gmail.com>
  35  *  04-10-2004
  36  *      Driver modified to support dynamic line settings.  Various improvments
  37  *      and features.
  38  *
  39  *  Neil Whelchel
  40  *  10-2003
  41  *      Driver first released.
  42  *
  43  */
  44
  45 /* Thanks to Neil Whelchel for writing the first cypress m8 implementation for linux. */
  46 /* Thanks to cypress for providing references for the hid reports. */
  47 /* Thanks to Jiang Zhang for providing links and for general help. */
  48 /* Code originates and was built up from ftdi_sio, belkin, pl2303 and others. */
  49
  50
  51 #include <linux/config.h>
  52 #include <linux/kernel.h>
  53 #include <linux/errno.h>
  54 #include <linux/init.h>
  55 #include <linux/slab.h>
  56 #include <linux/tty.h>
  57 #include <linux/tty_driver.h>
  58 #include <linux/tty_flip.h>
  59 #include <linux/module.h>
  60 #include <linux/moduleparam.h>
  61 #include <linux/spinlock.h>
  62 #include <linux/usb.h>
  63 #include <linux/serial.h>
  64 #include <linux/delay.h>
  65 #include <asm/uaccess.h>
  66
  67 #include "usb-serial.h"
  68 #include "cypress_m8.h"
  69
  70
  71 #ifdef CONFIG_USB_SERIAL_DEBUG
  72         static int debug = 1;
  73 #else
  74         static int debug;
  75 #endif
  76 static int stats;
  77 static int interval;
  78
  79 /*
  80  * Version Information
  81  */
  82 #define DRIVER_VERSION "v1.09"
  83 #define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
  84 #define DRIVER_DESC "Cypress USB to Serial Driver"
  85
  86 /* write buffer size defines */
  87 #define CYPRESS_BUF_SIZE        1024
  88 #define CYPRESS_CLOSING_WAIT    (30*HZ)
  89
  90 static struct usb_device_id id_table_earthmate [] = {
  91         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
  92         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
  93         { }                                             /* Terminating entry */
  94 };
  95
  96 static struct usb_device_id id_table_cyphidcomrs232 [] = {
  97         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
  98         { }                                             /* Terminating entry */
  99 };
 100
 101 static struct usb_device_id id_table_combined [] = {
 102         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
 103         { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
 104         { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
 105         { }                                             /* Terminating entry */
 106 };
 107
 108 MODULE_DEVICE_TABLE (usb, id_table_combined);
 109
 110 static struct usb_driver cypress_driver = {
 111         .name =         "cypress",
 112         .probe =        usb_serial_probe,
 113         .disconnect =   usb_serial_disconnect,
 114         .id_table =     id_table_combined,
 115 };
 116
 117 struct cypress_private {
 118         spinlock_t lock;                   /* private lock */
 119         int chiptype;                      /* identifier of device, for quirks/etc */
 120         int bytes_in;                      /* used for statistics */
 121         int bytes_out;                     /* used for statistics */
 122         int cmd_count;                     /* used for statistics */
 123         int cmd_ctrl;                      /* always set this to 1 before issuing a command */
 124         struct cypress_buf *buf;           /* write buffer */
 125         int write_urb_in_use;              /* write urb in use indicator */
 126         int termios_initialized;
 127         __u8 line_control;                 /* holds dtr / rts value */
 128         __u8 current_status;               /* received from last read - info on dsr,cts,cd,ri,etc */
 129         __u8 current_config;               /* stores the current configuration byte */
 130         __u8 rx_flags;                     /* throttling - used from whiteheat/ftdi_sio */
 131         int baud_rate;                     /* stores current baud rate in integer form */
 132         int cbr_mask;                      /* stores current baud rate in masked form */
 133         int isthrottled;                   /* if throttled, discard reads */
 134         wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
 135         char prev_status, diff_status;     /* used for TIOCMIWAIT */
 136         /* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
 137         struct termios tmp_termios;        /* stores the old termios settings */
 138 };
 139
 140 /* write buffer structure */
 141 struct cypress_buf {
 142         unsigned int    buf_size;
 143         char            *buf_buf;
 144         char            *buf_get;
 145         char            *buf_put;
 146 };
 147
 148 /* function prototypes for the Cypress USB to serial device */
 149 static int  cypress_earthmate_startup   (struct usb_serial *serial);
 150 static int  cypress_hidcom_startup      (struct usb_serial *serial);
 151 static void cypress_shutdown            (struct usb_serial *serial);
 152 static int  cypress_open                (struct usb_serial_port *port, struct file *filp);
 153 static void cypress_close               (struct usb_serial_port *port, struct file *filp);
 154 static int  cypress_write               (struct usb_serial_port *port, const unsigned char *buf, int count);
 155 static void cypress_send                (struct usb_serial_port *port);
 156 static int  cypress_write_room          (struct usb_serial_port *port);
 157 static int  cypress_ioctl               (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
 158 static void cypress_set_termios         (struct usb_serial_port *port, struct termios * old);
 159 static int  cypress_tiocmget            (struct usb_serial_port *port, struct file *file);
 160 static int  cypress_tiocmset            (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
 161 static int  cypress_chars_in_buffer     (struct usb_serial_port *port);
 162 static void cypress_throttle            (struct usb_serial_port *port);
 163 static void cypress_unthrottle          (struct usb_serial_port *port);
 164 static void cypress_read_int_callback   (struct urb *urb, struct pt_regs *regs);
 165 static void cypress_write_int_callback  (struct urb *urb, struct pt_regs *regs);
 166 /* baud helper functions */
 167 static int       mask_to_rate           (unsigned mask);
 168 static unsigned  rate_to_mask           (int rate);
 169 /* write buffer functions */
 170 static struct cypress_buf *cypress_buf_alloc(unsigned int size);
 171 static void               cypress_buf_free(struct cypress_buf *cb);
 172 static void               cypress_buf_clear(struct cypress_buf *cb);
 173 static unsigned int       cypress_buf_data_avail(struct cypress_buf *cb);
 174 static unsigned int       cypress_buf_space_avail(struct cypress_buf *cb);
 175 static unsigned int       cypress_buf_put(struct cypress_buf *cb, const char *buf, unsigned int count);
 176 static unsigned int       cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count);
 177
 178
 179 static struct usb_serial_device_type cypress_earthmate_device = {
 180         .owner =                        THIS_MODULE,
 181         .name =                         "DeLorme Earthmate USB",
 182         .short_name =                   "earthmate",
 183         .id_table =                     id_table_earthmate,
 184         .num_interrupt_in =             1,
 185         .num_interrupt_out =            1,
 186         .num_bulk_in =                  NUM_DONT_CARE,
 187         .num_bulk_out =                 NUM_DONT_CARE,
 188         .num_ports =                    1,
 189         .attach =                       cypress_earthmate_startup,
 190         .shutdown =                     cypress_shutdown,
 191         .open =                         cypress_open,
 192         .close =                        cypress_close,
 193         .write =                        cypress_write,
 194         .write_room =                   cypress_write_room,
 195         .ioctl =                        cypress_ioctl,
 196         .set_termios =                  cypress_set_termios,
 197         .tiocmget =                     cypress_tiocmget,
 198         .tiocmset =                     cypress_tiocmset,
 199         .chars_in_buffer =              cypress_chars_in_buffer,
 200         .throttle =                     cypress_throttle,
 201         .unthrottle =                   cypress_unthrottle,
 202         .read_int_callback =            cypress_read_int_callback,
 203         .write_int_callback =           cypress_write_int_callback,
 204 };
 205
 206 static struct usb_serial_device_type cypress_hidcom_device = {
 207         .owner =                        THIS_MODULE,
 208         .name =                         "HID->COM RS232 Adapter",
 209         .short_name =                   "cyphidcom",
 210         .id_table =                     id_table_cyphidcomrs232,
 211         .num_interrupt_in =             1,
 212         .num_interrupt_out =            1,
 213         .num_bulk_in =                  NUM_DONT_CARE,
 214         .num_bulk_out =                 NUM_DONT_CARE,
 215         .num_ports =                    1,
 216         .attach =                       cypress_hidcom_startup,
 217         .shutdown =                     cypress_shutdown,
 218         .open =                         cypress_open,
 219         .close =                        cypress_close,
 220         .write =                        cypress_write,
 221         .write_room =                   cypress_write_room,
 222         .ioctl =                        cypress_ioctl,
 223         .set_termios =                  cypress_set_termios,
 224         .tiocmget =                     cypress_tiocmget,
 225         .tiocmset =                     cypress_tiocmset,
 226         .chars_in_buffer =              cypress_chars_in_buffer,
 227         .throttle =                     cypress_throttle,
 228         .unthrottle =                   cypress_unthrottle,
 229         .read_int_callback =            cypress_read_int_callback,
 230         .write_int_callback =           cypress_write_int_callback,
 231 };
 232
 233
 234 /*****************************************************************************
 235  * Cypress serial helper functions
 236  *****************************************************************************/
 237
 238
 239 /* This function can either set or retrieve the current serial line settings */
 240 static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits,
 241                                    int parity_enable, int parity_type, int reset, int cypress_request_type)
 242 {
 243         int new_baudrate = 0, retval = 0, tries = 0;
 244         struct cypress_private *priv;
 245         __u8 feature_buffer[8];
 246         unsigned long flags;
 247
 248         dbg("%s", __FUNCTION__);
 249
 250         priv = usb_get_serial_port_data(port);
 251
 252         switch(cypress_request_type) {
 253                 case CYPRESS_SET_CONFIG:
 254
 255                         /*
 256                          * The general purpose firmware for the Cypress M8 allows for a maximum speed
 257                          * of 57600bps (I have no idea whether DeLorme chose to use the general purpose
 258                          * firmware or not), if you need to modify this speed setting for your own
 259                          * project please add your own chiptype and modify the code likewise.  The
 260                          * Cypress HID->COM device will work successfully up to 115200bps (but the
 261                          * actual throughput is around 3kBps).
 262                          */
 263                         if (baud_mask != priv->cbr_mask) {
 264                                 dbg("%s - baud rate is changing", __FUNCTION__);
 265                                 if ( priv->chiptype == CT_EARTHMATE ) {
 266                                         /* 300 and 600 baud rates are supported under the generic firmware,
 267                                          * but are not used with NMEA and SiRF protocols */
 268
 269                                         if ( (baud_mask == B300) || (baud_mask == B600) ) {
 270                                                 err("%s - failed setting baud rate, unsupported speed",
 271                                                     __FUNCTION__);
 272                                                 new_baudrate = priv->baud_rate;
 273                                         } else if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
 274                                                 err("%s - failed setting baud rate, unsupported speed",
 275                                                     __FUNCTION__);
 276                                                 new_baudrate = priv->baud_rate;
 277                                         }
 278                                 } else if (priv->chiptype == CT_CYPHIDCOM) {
 279                                         if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
 280                                                 err("%s - failed setting baud rate, unsupported speed",
 281                                                     __FUNCTION__);
 282                                                 new_baudrate = priv->baud_rate;
 283                                         }
 284                                 } else if (priv->chiptype == CT_GENERIC) {
 285                                         if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
 286                                                 err("%s - failed setting baud rate, unsupported speed",
 287                                                     __FUNCTION__);
 288                                                 new_baudrate = priv->baud_rate;
 289                                         }
 290                                 } else {
 291                                         info("%s - please define your chiptype", __FUNCTION__);
 292                                         new_baudrate = priv->baud_rate;
 293                                 }
 294                         } else {  /* baud rate not changing, keep the old */
 295                                 new_baudrate = priv->baud_rate;
 296                         }
 297                         dbg("%s - baud rate is being sent as %d", __FUNCTION__, new_baudrate);
 298
 299                         memset(feature_buffer, 0, 8);
 300                         /* fill the feature_buffer with new configuration */
 301                         *((u_int32_t *)feature_buffer) = new_baudrate;
 302
 303                         feature_buffer[4] |= data_bits;   /* assign data bits in 2 bit space ( max 3 ) */
 304                         /* 1 bit gap */
 305                         feature_buffer[4] |= (stop_bits << 3);   /* assign stop bits in 1 bit space */
 306                         feature_buffer[4] |= (parity_enable << 4);   /* assign parity flag in 1 bit space */
 307                         feature_buffer[4] |= (parity_type << 5);   /* assign parity type in 1 bit space */
 308                         /* 1 bit gap */
 309                         feature_buffer[4] |= (reset << 7);   /* assign reset at end of byte, 1 bit space */
 310
 311                         dbg("%s - device is being sent this feature report:", __FUNCTION__);
 312                         dbg("%s - %02X - %02X - %02X - %02X - %02X", __FUNCTION__, feature_buffer[0], feature_buffer[1],
 313                             feature_buffer[2], feature_buffer[3], feature_buffer[4]);
 314
 315                         do {
 316                         retval = usb_control_msg (port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
 317                                                   HID_REQ_SET_REPORT, USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 318                                                           0x0300, 0, feature_buffer, 8, 500);
 319
 320                                 if (tries++ >= 3)
 321                                         break;
 322
 323                                 if (retval == EPIPE)
 324                                         usb_clear_halt(port->serial->dev, 0x00);
 325                         } while (retval != 8 && retval != ENODEV);
 326
 327                         if (retval != 8)
 328                                 err("%s - failed sending serial line settings - %d", __FUNCTION__, retval);
 329                         else {
 330                                 spin_lock_irqsave(&priv->lock, flags);
 331                                 priv->baud_rate = new_baudrate;
 332                                 priv->cbr_mask = baud_mask;
 333                                 priv->current_config = feature_buffer[4];
 334                                 spin_unlock_irqrestore(&priv->lock, flags);
 335                         }
 336                 break;
 337                 case CYPRESS_GET_CONFIG:
 338                         dbg("%s - retreiving serial line settings", __FUNCTION__);
 339                         /* set initial values in feature buffer */
 340                         memset(feature_buffer, 0, 8);
 341
 342                         do {
 343                         retval = usb_control_msg (port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0),
 344                                                   HID_REQ_GET_REPORT, USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
 345                                                           0x0300, 0, feature_buffer, 8, 500);
 346
 347                                 if (tries++ >= 3)
 348                                         break;
 349
 350                                 if (retval == EPIPE)
 351                                         usb_clear_halt(port->serial->dev, 0x00);
 352                         } while (retval != 5 && retval != ENODEV);
 353
 354                         if (retval != 5) {
 355                                 err("%s - failed to retreive serial line settings - %d", __FUNCTION__, retval);
 356                                 return retval;
 357                         } else {
 358                                 spin_lock_irqsave(&priv->lock, flags);
 359
 360                                 /* store the config in one byte, and later use bit masks to check values */
 361                                 priv->current_config = feature_buffer[4];
 362                                 priv->baud_rate = *((u_int32_t *)feature_buffer);
 363
 364                                 if ( (priv->cbr_mask = rate_to_mask(priv->baud_rate)) == 0x40)
 365                                         dbg("%s - failed setting the baud mask (not defined)", __FUNCTION__);
 366                                 spin_unlock_irqrestore(&priv->lock, flags);
 367                         }
 368         }
 369         spin_lock_irqsave(&priv->lock, flags);
 370         ++priv->cmd_count;
 371         spin_unlock_irqrestore(&priv->lock, flags);
 372
 373         return retval;
 374 } /* cypress_serial_control */
 375
 376
 377 /* given a baud mask, it will return integer baud on success */
 378 static int mask_to_rate (unsigned mask)
 379 {
 380         int rate;
 381
 382         switch (mask) {
 383                 case B0: rate = 0; break;
 384                 case B300: rate = 300; break;
 385                 case B600: rate = 600; break;
 386                 case B1200: rate = 1200; break;
 387                 case B2400: rate = 2400; break;
 388                 case B4800: rate = 4800; break;
 389                 case B9600: rate = 9600; break;
 390                 case B19200: rate = 19200; break;
 391                 case B38400: rate = 38400; break;
 392                 case B57600: rate = 57600; break;
 393                 case B115200: rate = 115200; break;
 394                 default: rate = -1;
 395         }
 396
 397         return rate;
 398 }
 399
 400
 401 static unsigned rate_to_mask (int rate)
 402 {
 403         unsigned mask;
 404
 405         switch (rate) {
 406                 case 0: mask = B0; break;
 407                 case 300: mask = B300; break;
 408                 case 600: mask = B600; break;
 409                 case 1200: mask = B1200; break;
 410                 case 2400: mask = B2400; break;
 411                 case 4800: mask = B4800; break;
 412                 case 9600: mask = B9600; break;
 413                 case 19200: mask = B19200; break;
 414                 case 38400: mask = B38400; break;
 415                 case 57600: mask = B57600; break;
 416                 case 115200: mask = B115200; break;
 417                 default: mask = 0x40;
 418         }
 419
 420         return mask;
 421 }
 422 /*****************************************************************************
 423  * Cypress serial driver functions
 424  *****************************************************************************/
 425
 426
 427 static int generic_startup (struct usb_serial *serial)
 428 {
 429         struct cypress_private *priv;
 430
 431         dbg("%s - port %d", __FUNCTION__, serial->port[0]->number);
 432
 433         priv = kmalloc(sizeof (struct cypress_private), GFP_KERNEL);
 434         if (!priv)
 435                 return -ENOMEM;
 436
 437         memset(priv, 0x00, sizeof (struct cypress_private));
 438         spin_lock_init(&priv->lock);
 439         priv->buf = cypress_buf_alloc(CYPRESS_BUF_SIZE);
 440         if (priv->buf == NULL) {
 441                 kfree(priv);
 442                 return -ENOMEM;
 443         }
 444         init_waitqueue_head(&priv->delta_msr_wait);
 445
 446         usb_reset_configuration (serial->dev);
 447
 448         interval = 1;
 449         priv->cmd_ctrl = 0;
 450         priv->line_control = 0;
 451         priv->termios_initialized = 0;
 452         priv->rx_flags = 0;
 453         priv->cbr_mask = B300;
 454         usb_set_serial_port_data(serial->port[0], priv);
 455
 456         return 0;
 457 }
 458
 459
 460 static int cypress_earthmate_startup (struct usb_serial *serial)
 461 {
 462         struct cypress_private *priv;
 463
 464         dbg("%s", __FUNCTION__);
 465
 466         if (generic_startup(serial)) {
 467                 dbg("%s - Failed setting up port %d", __FUNCTION__,
 468                                 serial->port[0]->number);
 469                 return 1;
 470         }
 471
 472         priv = usb_get_serial_port_data(serial->port[0]);
 473         priv->chiptype = CT_EARTHMATE;
 474
 475         return 0;
 476 } /* cypress_earthmate_startup */
 477
 478
 479 static int cypress_hidcom_startup (struct usb_serial *serial)
 480 {
 481         struct cypress_private *priv;
 482
 483         dbg("%s", __FUNCTION__);
 484
 485         if (generic_startup(serial)) {
 486                 dbg("%s - Failed setting up port %d", __FUNCTION__,
 487                                 serial->port[0]->number);
 488                 return 1;
 489         }
 490
 491         priv = usb_get_serial_port_data(serial->port[0]);
 492         priv->chiptype = CT_CYPHIDCOM;
 493
 494         return 0;
 495 } /* cypress_hidcom_startup */
 496
 497
 498 static void cypress_shutdown (struct usb_serial *serial)
 499 {
 500         struct cypress_private *priv;
 501
 502         dbg ("%s - port %d", __FUNCTION__, serial->port[0]->number);
 503
 504         /* all open ports are closed at this point */
 505
 506         priv = usb_get_serial_port_data(serial->port[0]);
 507
 508         if (priv) {
 509                 cypress_buf_free(priv->buf);
 510                 kfree(priv);
 511                 usb_set_serial_port_data(serial->port[0], NULL);
 512         }
 513 }
 514
 515
 516 static int cypress_open (struct usb_serial_port *port, struct file *filp)
 517 {
 518         struct cypress_private *priv = usb_get_serial_port_data(port);
 519         struct usb_serial *serial = port->serial;
 520         unsigned long flags;
 521         int result = 0;
 522
 523         dbg("%s - port %d", __FUNCTION__, port->number);
 524
 525         /* clear halts before open */
 526         usb_clear_halt(serial->dev, 0x81);
 527         usb_clear_halt(serial->dev, 0x02);
 528
 529         spin_lock_irqsave(&priv->lock, flags);
 530         /* reset read/write statistics */
 531         priv->bytes_in = 0;
 532         priv->bytes_out = 0;
 533         priv->cmd_count = 0;
 534         priv->rx_flags = 0;
 535         spin_unlock_irqrestore(&priv->lock, flags);
 536
 537         /* setting to zero could cause data loss */
 538         port->tty->low_latency = 1;
 539
 540         /* raise both lines and set termios */
 541         spin_lock_irqsave(&priv->lock, flags);
 542         priv->line_control = CONTROL_DTR | CONTROL_RTS;
 543         priv->cmd_ctrl = 1;
 544         spin_unlock_irqrestore(&priv->lock, flags);
 545         result = cypress_write(port, NULL, 0);
 546
 547         if (result) {
 548                 dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __FUNCTION__, result);
 549                 return result;
 550         } else
 551                 dbg("%s - success setting the control lines", __FUNCTION__);
 552
 553         cypress_set_termios(port, &priv->tmp_termios);
 554
 555         /* setup the port and start reading from the device */
 556         if(!port->interrupt_in_urb){
 557                 err("%s - interrupt_in_urb is empty!", __FUNCTION__);
 558                 return(-1);
 559         }
 560
 561         usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
 562                 usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
 563                 port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length,
 564                 cypress_read_int_callback, port, interval);
 565         result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 566
 567         if (result){
 568                 dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
 569         }
 570
 571         return result;
 572 } /* cypress_open */
 573
 574
 575 static void cypress_close(struct usb_serial_port *port, struct file * filp)
 576 {
 577         struct cypress_private *priv = usb_get_serial_port_data(port);
 578         unsigned int c_cflag;
 579         unsigned long flags;
 580         int bps;
 581         long timeout;
 582         wait_queue_t wait;
 583
 584         dbg("%s - port %d", __FUNCTION__, port->number);
 585
 586         /* wait for data to drain from buffer */
 587         spin_lock_irqsave(&priv->lock, flags);
 588         timeout = CYPRESS_CLOSING_WAIT;
 589         init_waitqueue_entry(&wait, current);
 590         add_wait_queue(&port->tty->write_wait, &wait);
 591         for (;;) {
 592                 set_current_state(TASK_INTERRUPTIBLE);
 593                 if (cypress_buf_data_avail(priv->buf) == 0
 594                 || timeout == 0 || signal_pending(current)
 595                 || !usb_get_intfdata(port->serial->interface))
 596                         break;
 597                 spin_unlock_irqrestore(&priv->lock, flags);
 598                 timeout = schedule_timeout(timeout);
 599                 spin_lock_irqsave(&priv->lock, flags);
 600         }
 601         set_current_state(TASK_RUNNING);
 602         remove_wait_queue(&port->tty->write_wait, &wait);
 603         /* clear out any remaining data in the buffer */
 604         cypress_buf_clear(priv->buf);
 605         spin_unlock_irqrestore(&priv->lock, flags);
 606
 607         /* wait for characters to drain from device */
 608         bps = tty_get_baud_rate(port->tty);
 609         if (bps > 1200)
 610                 timeout = max((HZ*2560)/bps,HZ/10);
 611         else
 612                 timeout = 2*HZ;
 613         schedule_timeout_interruptible(timeout);
 614
 615         dbg("%s - stopping urbs", __FUNCTION__);
 616         usb_kill_urb (port->interrupt_in_urb);
 617         usb_kill_urb (port->interrupt_out_urb);
 618
 619         if (port->tty) {
 620                 c_cflag = port->tty->termios->c_cflag;
 621                 if (c_cflag & HUPCL) {
 622                         /* drop dtr and rts */
 623                         priv = usb_get_serial_port_data(port);
 624                         spin_lock_irqsave(&priv->lock, flags);
 625                         priv->line_control = 0;
 626                         priv->cmd_ctrl = 1;
 627                         spin_unlock_irqrestore(&priv->lock, flags);
 628                         cypress_write(port, NULL, 0);
 629                 }
 630         }
 631
 632         if (stats)
 633                 dev_info (&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
 634                           priv->bytes_in, priv->bytes_out, priv->cmd_count);
 635 } /* cypress_close */
 636
 637
 638 static int cypress_write(struct usb_serial_port *port, const unsigned char *buf, int count)
 639 {
 640         struct cypress_private *priv = usb_get_serial_port_data(port);
 641         unsigned long flags;
 642
 643         dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);
 644
 645         /* line control commands, which need to be executed immediately,
 646            are not put into the buffer for obvious reasons.
 647          */
 648         if (priv->cmd_ctrl) {
 649                 count = 0;
 650                 goto finish;
 651         }
 652
 653         if (!count)
 654                 return count;
 655
 656         spin_lock_irqsave(&priv->lock, flags);
 657         count = cypress_buf_put(priv->buf, buf, count);
 658         spin_unlock_irqrestore(&priv->lock, flags);
 659
 660 finish:
 661         cypress_send(port);
 662
 663         return count;
 664 } /* cypress_write */
 665
 666
 667 static void cypress_send(struct usb_serial_port *port)
 668 {
 669         int count = 0, result, offset, actual_size;
 670         struct cypress_private *priv = usb_get_serial_port_data(port);
 671         unsigned long flags;
 672
 673         dbg("%s - port %d", __FUNCTION__, port->number);
 674         dbg("%s - interrupt out size is %d", __FUNCTION__, port->interrupt_out_size);
 675
 676         spin_lock_irqsave(&priv->lock, flags);
 677         if (priv->write_urb_in_use) {
 678                 dbg("%s - can't write, urb in use", __FUNCTION__);
 679                 spin_unlock_irqrestore(&priv->lock, flags);
 680                 return;
 681         }
 682         spin_unlock_irqrestore(&priv->lock, flags);
 683
 684         /* clear buffer */
 685         memset(port->interrupt_out_urb->transfer_buffer, 0, port->interrupt_out_size);
 686
 687         spin_lock_irqsave(&priv->lock, flags);
 688         switch (port->interrupt_out_size) {
 689                 case 32:
 690                         /* this is for the CY7C64013... */
 691                         offset = 2;
 692                         port->interrupt_out_buffer[0] = priv->line_control;
 693                         break;
 694                 case 8:
 695                         /* this is for the CY7C63743... */
 696                         offset = 1;
 697                         port->interrupt_out_buffer[0] = priv->line_control;
 698                         break;
 699                 default:
 700                         dbg("%s - wrong packet size", __FUNCTION__);
 701                         spin_unlock_irqrestore(&priv->lock, flags);
 702                         return;
 703         }
 704
 705         if (priv->line_control & CONTROL_RESET)
 706                 priv->line_control &= ~CONTROL_RESET;
 707
 708         if (priv->cmd_ctrl) {
 709                 priv->cmd_count++;
 710                 dbg("%s - line control command being issued", __FUNCTION__);
 711                 spin_unlock_irqrestore(&priv->lock, flags);
 712                 goto send;
 713         } else
 714                 spin_unlock_irqrestore(&priv->lock, flags);
 715
 716         count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset],
 717                                 port->interrupt_out_size-offset);
 718
 719         if (count == 0) {
 720                 return;
 721         }
 722
 723         switch (port->interrupt_out_size) {
 724                 case 32:
 725                         port->interrupt_out_buffer[1] = count;
 726                         break;
 727                 case 8:
 728                         port->interrupt_out_buffer[0] |= count;
 729         }
 730
 731         dbg("%s - count is %d", __FUNCTION__, count);
 732
 733 send:
 734         spin_lock_irqsave(&priv->lock, flags);
 735         priv->write_urb_in_use = 1;
 736         spin_unlock_irqrestore(&priv->lock, flags);
 737
 738         if (priv->cmd_ctrl)
 739                 actual_size = 1;
 740         else
 741                 actual_size = count + (port->interrupt_out_size == 32 ? 2 : 1);
 742
 743         usb_serial_debug_data(debug, &port->dev, __FUNCTION__, port->interrupt_out_size,
 744                               port->interrupt_out_urb->transfer_buffer);
 745
 746         port->interrupt_out_urb->transfer_buffer_length = actual_size;
 747         port->interrupt_out_urb->dev = port->serial->dev;
 748         port->interrupt_out_urb->interval = interval;
 749         result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC);
 750         if (result) {
 751                 dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__,
 752                         result);
 753                 priv->write_urb_in_use = 0;
 754         }
 755
 756         spin_lock_irqsave(&priv->lock, flags);
 757         if (priv->cmd_ctrl) {
 758                 priv->cmd_ctrl = 0;
 759         }
 760         priv->bytes_out += count; /* do not count the line control and size bytes */
 761         spin_unlock_irqrestore(&priv->lock, flags);
 762
 763         schedule_work(&port->work);
 764 } /* cypress_send */
 765
 766
 767 /* returns how much space is available in the soft buffer */
 768 static int cypress_write_room(struct usb_serial_port *port)
 769 {
 770         struct cypress_private *priv = usb_get_serial_port_data(port);
 771         int room = 0;
 772         unsigned long flags;
 773
 774         dbg("%s - port %d", __FUNCTION__, port->number);
 775
 776         spin_lock_irqsave(&priv->lock, flags);
 777         room = cypress_buf_space_avail(priv->buf);
 778         spin_unlock_irqrestore(&priv->lock, flags);
 779
 780         dbg("%s - returns %d", __FUNCTION__, room);
 781         return room;
 782 }
 783
 784
 785 static int cypress_tiocmget (struct usb_serial_port *port, struct file *file)
 786 {
 787         struct cypress_private *priv = usb_get_serial_port_data(port);
 788         __u8 status, control;
 789         unsigned int result = 0;
 790         unsigned long flags;
 791
 792         dbg("%s - port %d", __FUNCTION__, port->number);
 793
 794         spin_lock_irqsave(&priv->lock, flags);
 795         control = priv->line_control;
 796         status = priv->current_status;
 797         spin_unlock_irqrestore(&priv->lock, flags);
 798
 799         result = ((control & CONTROL_DTR)        ? TIOCM_DTR : 0)
 800                 | ((control & CONTROL_RTS)       ? TIOCM_RTS : 0)
 801                 | ((status & UART_CTS)        ? TIOCM_CTS : 0)
 802                 | ((status & UART_DSR)        ? TIOCM_DSR : 0)
 803                 | ((status & UART_RI)         ? TIOCM_RI  : 0)
 804                 | ((status & UART_CD)         ? TIOCM_CD  : 0);
 805
 806         dbg("%s - result = %x", __FUNCTION__, result);
 807
 808         return result;
 809 }
 810
 811
 812 static int cypress_tiocmset (struct usb_serial_port *port, struct file *file,
 813                                unsigned int set, unsigned int clear)
 814 {
 815         struct cypress_private *priv = usb_get_serial_port_data(port);
 816         unsigned long flags;
 817
 818         dbg("%s - port %d", __FUNCTION__, port->number);
 819
 820         spin_lock_irqsave(&priv->lock, flags);
 821         if (set & TIOCM_RTS)
 822                 priv->line_control |= CONTROL_RTS;
 823         if (set & TIOCM_DTR)
 824                 priv->line_control |= CONTROL_DTR;
 825         if (clear & TIOCM_RTS)
 826                 priv->line_control &= ~CONTROL_RTS;
 827         if (clear & TIOCM_DTR)
 828                 priv->line_control &= ~CONTROL_DTR;
 829         spin_unlock_irqrestore(&priv->lock, flags);
 830
 831         priv->cmd_ctrl = 1;
 832         return cypress_write(port, NULL, 0);
 833 }
 834
 835
 836 static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
 837 {
 838         struct cypress_private *priv = usb_get_serial_port_data(port);
 839
 840         dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
 841
 842         switch (cmd) {
 843                 case TIOCGSERIAL:
 844                         if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct termios))) {
 845                                 return -EFAULT;
 846                         }
 847                         return (0);
 848                         break;
 849                 case TIOCSSERIAL:
 850                         if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct termios))) {
 851                                 return -EFAULT;
 852                         }
 853                         /* here we need to call cypress_set_termios to invoke the new settings */
 854                         cypress_set_termios(port, &priv->tmp_termios);
 855                         return (0);
 856                         break;
 857                 /* these are called when setting baud rate from gpsd */
 858                 case TCGETS:
 859                         if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct termios))) {
 860                                 return -EFAULT;
 861                         }
 862                         return (0);
 863                         break;
 864                 case TCSETS:
 865                         if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct termios))) {
 866                                 return -EFAULT;
 867                         }
 868                         /* here we need to call cypress_set_termios to invoke the new settings */
 869                         cypress_set_termios(port, &priv->tmp_termios);
 870                         return (0);
 871                         break;
 872                 /* This code comes from drivers/char/serial.c and ftdi_sio.c */
 873                 case TIOCMIWAIT:
 874                         while (priv != NULL) {
 875                                 interruptible_sleep_on(&priv->delta_msr_wait);
 876                                 /* see if a signal did it */
 877                                 if (signal_pending(current))
 878                                         return -ERESTARTSYS;
 879                                 else {
 880                                         char diff = priv->diff_status;
 881
 882                                         if (diff == 0) {
 883                                                 return -EIO; /* no change => error */
 884                                         }
 885
 886                                         /* consume all events */
 887                                         priv->diff_status = 0;
 888
 889                                         /* return 0 if caller wanted to know about these bits */
 890                                         if ( ((arg & TIOCM_RNG) && (diff & UART_RI)) ||
 891                                              ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
 892                                              ((arg & TIOCM_CD) && (diff & UART_CD)) ||
 893                                              ((arg & TIOCM_CTS) && (diff & UART_CTS)) ) {
 894                                                 return 0;
 895                                         }
 896                                         /* otherwise caller can't care less about what happened,
 897                                          * and so we continue to wait for more events.
 898                                          */
 899                                 }
 900                         }
 901                         return 0;
 902                         break;
 903                 default:
 904                         break;
 905         }
 906
 907         dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __FUNCTION__, cmd);
 908
 909         return -ENOIOCTLCMD;
 910 } /* cypress_ioctl */
 911
 912
 913 static void cypress_set_termios (struct usb_serial_port *port,
 914                 struct termios *old_termios)
 915 {
 916         struct cypress_private *priv = usb_get_serial_port_data(port);
 917         struct tty_struct *tty;
 918         int data_bits, stop_bits, parity_type, parity_enable;
 919         unsigned cflag, iflag, baud_mask;
 920         unsigned long flags;
 921         __u8 oldlines;
 922         int linechange = 0;
 923
 924         dbg("%s - port %d", __FUNCTION__, port->number);
 925
 926         tty = port->tty;
 927         if ((!tty) || (!tty->termios)) {
 928                 dbg("%s - no tty structures", __FUNCTION__);
 929                 return;
 930         }
 931
 932         spin_lock_irqsave(&priv->lock, flags);
 933         if (!priv->termios_initialized) {
 934                 if (priv->chiptype == CT_EARTHMATE) {
 935                         *(tty->termios) = tty_std_termios;
 936                         tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
 937                                 CLOCAL;
 938                 } else if (priv->chiptype == CT_CYPHIDCOM) {
 939                         *(tty->termios) = tty_std_termios;
 940                         tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
 941                                 CLOCAL;
 942                 }
 943                 priv->termios_initialized = 1;
 944         }
 945         spin_unlock_irqrestore(&priv->lock, flags);
 946
 947         cflag = tty->termios->c_cflag;
 948         iflag = tty->termios->c_iflag;
 949
 950         /* check if there are new settings */
 951         if (old_termios) {
 952                 if ((cflag != old_termios->c_cflag) ||
 953                         (RELEVANT_IFLAG(iflag) !=
 954                          RELEVANT_IFLAG(old_termios->c_iflag))) {
 955                         dbg("%s - attempting to set new termios settings",
 956                                         __FUNCTION__);
 957                         /* should make a copy of this in case something goes
 958                          * wrong in the function, we can restore it */
 959                         spin_lock_irqsave(&priv->lock, flags);
 960                         priv->tmp_termios = *(tty->termios);
 961                         spin_unlock_irqrestore(&priv->lock, flags);
 962                 } else {
 963                         dbg("%s - nothing to do, exiting", __FUNCTION__);
 964                         return;
 965                 }
 966         } else
 967                 return;
 968
 969         /* set number of data bits, parity, stop bits */
 970         /* when parity is disabled the parity type bit is ignored */
 971
 972         /* 1 means 2 stop bits, 0 means 1 stop bit */
 973         stop_bits = cflag & CSTOPB ? 1 : 0;
 974
 975         if (cflag & PARENB) {
 976                 parity_enable = 1;
 977                 /* 1 means odd parity, 0 means even parity */
 978                 parity_type = cflag & PARODD ? 1 : 0;
 979         } else
 980                 parity_enable = parity_type = 0;
 981
 982         if (cflag & CSIZE) {
 983                 switch (cflag & CSIZE) {
 984                         case CS5:
 985                                 data_bits = 0;
 986                                 break;
 987                         case CS6:
 988                                 data_bits = 1;
 989                                 break;
 990                         case CS7:
 991                                 data_bits = 2;
 992                                 break;
 993                         case CS8:
 994                                 data_bits = 3;
 995                                 break;
 996                         default:
 997                                 err("%s - CSIZE was set, but not CS5-CS8",
 998                                                 __FUNCTION__);
 999                                 data_bits = 3;
1000                 }
1001         } else
1002                 data_bits = 3;
1003
1004         spin_lock_irqsave(&priv->lock, flags);
1005         oldlines = priv->line_control;
1006         if ((cflag & CBAUD) == B0) {
1007                 /* drop dtr and rts */
1008                 dbg("%s - dropping the lines, baud rate 0bps", __FUNCTION__);
1009                 baud_mask = B0;
1010                 priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
1011         } else {
1012                 baud_mask = (cflag & CBAUD);
1013                 switch(baud_mask) {
1014                         case B300:
1015                                 dbg("%s - setting baud 300bps", __FUNCTION__);
1016                                 break;
1017                         case B600:
1018                                 dbg("%s - setting baud 600bps", __FUNCTION__);
1019                                 break;
1020                         case B1200:
1021                                 dbg("%s - setting baud 1200bps", __FUNCTION__);
1022                                 break;
1023                         case B2400:
1024                                 dbg("%s - setting baud 2400bps", __FUNCTION__);
1025                                 break;
1026                         case B4800:
1027                                 dbg("%s - setting baud 4800bps", __FUNCTION__);
1028                                 break;
1029                         case B9600:
1030                                 dbg("%s - setting baud 9600bps", __FUNCTION__);
1031                                 break;
1032                         case B19200:
1033                                 dbg("%s - setting baud 19200bps", __FUNCTION__);
1034                                 break;
1035                         case B38400:
1036                                 dbg("%s - setting baud 38400bps", __FUNCTION__);
1037                                 break;
1038                         case B57600:
1039                                 dbg("%s - setting baud 57600bps", __FUNCTION__);
1040                                 break;
1041                         case B115200:
1042                                 dbg("%s - setting baud 115200bps", __FUNCTION__);
1043                                 break;
1044                         default:
1045                                 dbg("%s - unknown masked baud rate", __FUNCTION__);
1046                 }
1047                 priv->line_control = (CONTROL_DTR | CONTROL_RTS);
1048         }
1049         spin_unlock_irqrestore(&priv->lock, flags);
1050
1051         dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
1052                         "%d data_bits (+5)", __FUNCTION__, stop_bits,
1053                         parity_enable, parity_type, data_bits);
1054
1055         cypress_serial_control(port, baud_mask, data_bits, stop_bits,
1056                         parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);
1057
1058         /* we perform a CYPRESS_GET_CONFIG so that the current settings are
1059          * filled into the private structure this should confirm that all is
1060          * working if it returns what we just set */
1061         cypress_serial_control(port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);
1062
1063         /* Here we can define custom tty settings for devices; the main tty
1064          * termios flag base comes from empeg.c */
1065
1066         spin_lock_irqsave(&priv->lock, flags);
1067         if ( (priv->chiptype == CT_EARTHMATE) && (priv->baud_rate == 4800) ) {
1068                 dbg("Using custom termios settings for a baud rate of "
1069                                 "4800bps.");
1070                 /* define custom termios settings for NMEA protocol */
1071
1072                 tty->termios->c_iflag /* input modes - */
1073                         &= ~(IGNBRK  /* disable ignore break */
1074                         | BRKINT     /* disable break causes interrupt */
1075                         | PARMRK     /* disable mark parity errors */
1076                         | ISTRIP     /* disable clear high bit of input char */
1077                         | INLCR      /* disable translate NL to CR */
1078                         | IGNCR      /* disable ignore CR */
1079                         | ICRNL      /* disable translate CR to NL */
1080                         | IXON);     /* disable enable XON/XOFF flow control */
1081
1082                 tty->termios->c_oflag /* output modes */
1083                         &= ~OPOST;    /* disable postprocess output char */
1084
1085                 tty->termios->c_lflag /* line discipline modes */
1086                         &= ~(ECHO     /* disable echo input characters */
1087                         | ECHONL      /* disable echo new line */
1088                         | ICANON      /* disable erase, kill, werase, and rprnt
1089                                          special characters */
1090                         | ISIG        /* disable interrupt, quit, and suspend
1091                                          special characters */
1092                         | IEXTEN);    /* disable non-POSIX special characters */
1093         } /* CT_CYPHIDCOM: Application should handle this for device */
1094
1095         linechange = (priv->line_control != oldlines);
1096         spin_unlock_irqrestore(&priv->lock, flags);
1097
1098         /* if necessary, set lines */
1099         if (linechange) {
1100                 priv->cmd_ctrl = 1;
1101                 cypress_write(port, NULL, 0);
1102         }
1103 } /* cypress_set_termios */
1104
1105
1106 /* returns amount of data still left in soft buffer */
1107 static int cypress_chars_in_buffer(struct usb_serial_port *port)
1108 {
1109         struct cypress_private *priv = usb_get_serial_port_data(port);
1110         int chars = 0;
1111         unsigned long flags;
1112
1113         dbg("%s - port %d", __FUNCTION__, port->number);
1114
1115         spin_lock_irqsave(&priv->lock, flags);
1116         chars = cypress_buf_data_avail(priv->buf);
1117         spin_unlock_irqrestore(&priv->lock, flags);
1118
1119         dbg("%s - returns %d", __FUNCTION__, chars);
1120         return chars;
1121 }
1122
1123
1124 static void cypress_throttle (struct usb_serial_port *port)
1125 {
1126         struct cypress_private *priv = usb_get_serial_port_data(port);
1127         unsigned long flags;
1128
1129         dbg("%s - port %d", __FUNCTION__, port->number);
1130
1131         spin_lock_irqsave(&priv->lock, flags);
1132         priv->rx_flags = THROTTLED;
1133         spin_unlock_irqrestore(&priv->lock, flags);
1134 }
1135
1136
1137 static void cypress_unthrottle (struct usb_serial_port *port)
1138 {
1139         struct cypress_private *priv = usb_get_serial_port_data(port);
1140         int actually_throttled, result;
1141         unsigned long flags;
1142
1143         dbg("%s - port %d", __FUNCTION__, port->number);
1144
1145         spin_lock_irqsave(&priv->lock, flags);
1146         actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
1147         priv->rx_flags = 0;
1148         spin_unlock_irqrestore(&priv->lock, flags);
1149
1150         if (actually_throttled) {
1151                 port->interrupt_in_urb->dev = port->serial->dev;
1152
1153                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1154                 if (result)
1155                         dev_err(&port->dev, "%s - failed submitting read urb, "
1156                                         "error %d\n", __FUNCTION__, result);
1157         }
1158 }
1159
1160
1161 static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
1162 {
1163         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
1164         struct cypress_private *priv = usb_get_serial_port_data(port);
1165         struct tty_struct *tty;
1166         unsigned char *data = urb->transfer_buffer;
1167         unsigned long flags;
1168         char tty_flag = TTY_NORMAL;
1169         int havedata = 0;
1170         int bytes = 0;
1171         int result;
1172         int i = 0;
1173
1174         dbg("%s - port %d", __FUNCTION__, port->number);
1175
1176         if (urb->status) {
1177                 dbg("%s - nonzero read status received: %d", __FUNCTION__,
1178                                 urb->status);
1179                 return;
1180         }
1181
1182         spin_lock_irqsave(&priv->lock, flags);
1183         if (priv->rx_flags & THROTTLED) {
1184                 dbg("%s - now throttling", __FUNCTION__);
1185                 priv->rx_flags |= ACTUALLY_THROTTLED;
1186                 spin_unlock_irqrestore(&priv->lock, flags);
1187                 return;
1188         }
1189         spin_unlock_irqrestore(&priv->lock, flags);
1190
1191         tty = port->tty;
1192         if (!tty) {
1193                 dbg("%s - bad tty pointer - exiting", __FUNCTION__);
1194                 return;
1195         }
1196
1197         spin_lock_irqsave(&priv->lock, flags);
1198         switch(urb->actual_length) {
1199                 case 32:
1200                         /* This is for the CY7C64013... */
1201                         priv->current_status = data[0] & 0xF8;
1202                         bytes = data[1] + 2;
1203                         i = 2;
1204                         if (bytes > 2)
1205                                 havedata = 1;
1206                         break;
1207                 case 8:
1208                         /* This is for the CY7C63743... */
1209                         priv->current_status = data[0] & 0xF8;
1210                         bytes = (data[0] & 0x07) + 1;
1211                         i = 1;
1212                         if (bytes > 1)
1213                                 havedata = 1;
1214                         break;
1215                 default:
1216                         dbg("%s - wrong packet size - received %d bytes",
1217                                         __FUNCTION__, urb->actual_length);
1218                         spin_unlock_irqrestore(&priv->lock, flags);
1219                         goto continue_read;
1220         }
1221         spin_unlock_irqrestore(&priv->lock, flags);
1222
1223         usb_serial_debug_data (debug, &port->dev, __FUNCTION__,
1224                         urb->actual_length, data);
1225
1226         spin_lock_irqsave(&priv->lock, flags);
1227         /* check to see if status has changed */
1228         if (priv != NULL) {
1229                 if (priv->current_status != priv->prev_status) {
1230                         priv->diff_status |= priv->current_status ^
1231                                 priv->prev_status;
1232                         wake_up_interruptible(&priv->delta_msr_wait);
1233                         priv->prev_status = priv->current_status;
1234                 }
1235         }
1236         spin_unlock_irqrestore(&priv->lock, flags);
1237
1238         /* hangup, as defined in acm.c... this might be a bad place for it
1239          * though */
1240         if (tty && !(tty->termios->c_cflag & CLOCAL) &&
1241                         !(priv->current_status & UART_CD)) {
1242                 dbg("%s - calling hangup", __FUNCTION__);
1243                 tty_hangup(tty);
1244                 goto continue_read;
1245         }
1246
1247         /* There is one error bit... I'm assuming it is a parity error
1248          * indicator as the generic firmware will set this bit to 1 if a
1249          * parity error occurs.
1250          * I can not find reference to any other error events. */
1251         spin_lock_irqsave(&priv->lock, flags);
1252         if (priv->current_status & CYP_ERROR) {
1253                 spin_unlock_irqrestore(&priv->lock, flags);
1254                 tty_flag = TTY_PARITY;
1255                 dbg("%s - Parity Error detected", __FUNCTION__);
1256         } else
1257                 spin_unlock_irqrestore(&priv->lock, flags);
1258
1259         /* process read if there is data other than line status */
1260         if (tty && (bytes > i)) {
1261                 for (; i < bytes ; ++i) {
1262                         dbg("pushing byte number %d - %d - %c", i, data[i],
1263                                         data[i]);
1264                         if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
1265                                 tty_flip_buffer_push(tty);
1266                         }
1267                         tty_insert_flip_char(tty, data[i], tty_flag);
1268                 }
1269                 tty_flip_buffer_push(port->tty);
1270         }
1271
1272         spin_lock_irqsave(&priv->lock, flags);
1273         /* control and status byte(s) are also counted */
1274         priv->bytes_in += bytes;
1275         spin_unlock_irqrestore(&priv->lock, flags);
1276
1277 continue_read:
1278
1279         /* Continue trying to always read... unless the port has closed. */
1280
1281         if (port->open_count > 0) {
1282                 usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
1283                                 usb_rcvintpipe(port->serial->dev,
1284                                         port->interrupt_in_endpointAddress),
1285                                 port->interrupt_in_urb->transfer_buffer,
1286                                 port->interrupt_in_urb->transfer_buffer_length,
1287                                 cypress_read_int_callback, port, interval);
1288                 result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
1289                 if (result)
1290                         dev_err(&urb->dev->dev, "%s - failed resubmitting "
1291                                         "read urb, error %d\n", __FUNCTION__,
1292                                         result);
1293         }
1294
1295         return;
1296 } /* cypress_read_int_callback */
1297
1298
1299 static void cypress_write_int_callback(struct urb *urb, struct pt_regs *regs)
1300 {
1301         struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
1302         struct cypress_private *priv = usb_get_serial_port_data(port);
1303         int result;
1304
1305         dbg("%s - port %d", __FUNCTION__, port->number);
1306
1307         switch (urb->status) {
1308                 case 0:
1309                         /* success */
1310                         break;
1311                 case -ECONNRESET:
1312                 case -ENOENT:
1313                 case -ESHUTDOWN:
1314                         /* this urb is terminated, clean up */
1315                         dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
1316                         priv->write_urb_in_use = 0;
1317                         return;
1318                 case -EPIPE: /* no break needed */
1319                         usb_clear_halt(port->serial->dev, 0x02);
1320                 default:
1321                         /* error in the urb, so we have to resubmit it */
1322                         dbg("%s - Overflow in write", __FUNCTION__);
1323                         dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
1324                         port->interrupt_out_urb->transfer_buffer_length = 1;
1325                         port->interrupt_out_urb->dev = port->serial->dev;
1326                         result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
1327                         if (result)
1328                                 dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n",
1329                                         __FUNCTION__, result);
1330                         else
1331                                 return;
1332         }
1333
1334         priv->write_urb_in_use = 0;
1335
1336         /* send any buffered data */
1337         cypress_send(port);
1338 }
1339
1340
1341 /*****************************************************************************
1342  * Write buffer functions - buffering code from pl2303 used
1343  *****************************************************************************/
1344
1345 /*
1346  * cypress_buf_alloc
1347  *
1348  * Allocate a circular buffer and all associated memory.
1349  */
1350
1351 static struct cypress_buf *cypress_buf_alloc(unsigned int size)
1352 {
1353
1354         struct cypress_buf *cb;
1355
1356
1357         if (size == 0)
1358                 return NULL;
1359
1360         cb = (struct cypress_buf *)kmalloc(sizeof(struct cypress_buf), GFP_KERNEL);
1361         if (cb == NULL)
1362                 return NULL;
1363
1364         cb->buf_buf = kmalloc(size, GFP_KERNEL);
1365         if (cb->buf_buf == NULL) {
1366                 kfree(cb);
1367                 return NULL;
1368         }
1369
1370         cb->buf_size = size;
1371         cb->buf_get = cb->buf_put = cb->buf_buf;
1372
1373         return cb;
1374
1375 }
1376
1377
1378 /*
1379  * cypress_buf_free
1380  *
1381  * Free the buffer and all associated memory.
1382  */
1383
1384 static void cypress_buf_free(struct cypress_buf *cb)
1385 {
1386         if (cb) {
1387                 kfree(cb->buf_buf);
1388                 kfree(cb);
1389         }
1390 }
1391
1392
1393 /*
1394  * cypress_buf_clear
1395  *
1396  * Clear out all data in the circular buffer.
1397  */
1398
1399 static void cypress_buf_clear(struct cypress_buf *cb)
1400 {
1401         if (cb != NULL)
1402                 cb->buf_get = cb->buf_put;
1403                 /* equivalent to a get of all data available */
1404 }
1405
1406
1407 /*
1408  * cypress_buf_data_avail
1409  *
1410  * Return the number of bytes of data available in the circular
1411  * buffer.
1412  */
1413
1414 static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
1415 {
1416         if (cb != NULL)
1417                 return ((cb->buf_size + cb->buf_put - cb->buf_get) % cb->buf_size);
1418         else
1419                 return 0;
1420 }
1421
1422
1423 /*
1424  * cypress_buf_space_avail
1425  *
1426  * Return the number of bytes of space available in the circular
1427  * buffer.
1428  */
1429
1430 static unsigned int cypress_buf_space_avail(struct cypress_buf *cb)
1431 {
1432         if (cb != NULL)
1433                 return ((cb->buf_size + cb->buf_get - cb->buf_put - 1) % cb->buf_size);
1434         else
1435                 return 0;
1436 }
1437
1438
1439 /*
1440  * cypress_buf_put
1441  *
1442  * Copy data data from a user buffer and put it into the circular buffer.
1443  * Restrict to the amount of space available.
1444  *
1445  * Return the number of bytes copied.
1446  */
1447
1448 static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf,
1449         unsigned int count)
1450 {
1451
1452         unsigned int len;
1453
1454
1455         if (cb == NULL)
1456                 return 0;
1457
1458         len  = cypress_buf_space_avail(cb);
1459         if (count > len)
1460                 count = len;
1461
1462         if (count == 0)
1463                 return 0;
1464
1465         len = cb->buf_buf + cb->buf_size - cb->buf_put;
1466         if (count > len) {
1467                 memcpy(cb->buf_put, buf, len);
1468                 memcpy(cb->buf_buf, buf+len, count - len);
1469                 cb->buf_put = cb->buf_buf + count - len;
1470         } else {
1471                 memcpy(cb->buf_put, buf, count);
1472                 if (count < len)
1473                         cb->buf_put += count;
1474                 else /* count == len */
1475                         cb->buf_put = cb->buf_buf;
1476         }
1477
1478         return count;
1479
1480 }
1481
1482
1483 /*
1484  * cypress_buf_get
1485  *
1486  * Get data from the circular buffer and copy to the given buffer.
1487  * Restrict to the amount of data available.
1488  *
1489  * Return the number of bytes copied.
1490  */
1491
1492 static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf,
1493         unsigned int count)
1494 {
1495
1496         unsigned int len;
1497
1498
1499         if (cb == NULL)
1500                 return 0;
1501
1502         len = cypress_buf_data_avail(cb);
1503         if (count > len)
1504                 count = len;
1505
1506         if (count == 0)
1507                 return 0;
1508
1509         len = cb->buf_buf + cb->buf_size - cb->buf_get;
1510         if (count > len) {
1511                 memcpy(buf, cb->buf_get, len);
1512                 memcpy(buf+len, cb->buf_buf, count - len);
1513                 cb->buf_get = cb->buf_buf + count - len;
1514         } else {
1515                 memcpy(buf, cb->buf_get, count);
1516                 if (count < len)
1517                         cb->buf_get += count;
1518                 else /* count == len */
1519                         cb->buf_get = cb->buf_buf;
1520         }
1521
1522         return count;
1523
1524 }
1525
1526 /*****************************************************************************
1527  * Module functions
1528  *****************************************************************************/
1529
1530 static int __init cypress_init(void)
1531 {
1532         int retval;
1533
1534         dbg("%s", __FUNCTION__);
1535
1536         retval = usb_serial_register(&cypress_earthmate_device);
1537         if (retval)
1538                 goto failed_em_register;
1539         retval = usb_serial_register(&cypress_hidcom_device);
1540         if (retval)
1541                 goto failed_hidcom_register;
1542         retval = usb_register(&cypress_driver);
1543         if (retval)
1544                 goto failed_usb_register;
1545
1546         info(DRIVER_DESC " " DRIVER_VERSION);
1547         return 0;
1548 failed_usb_register:
1549         usb_deregister(&cypress_driver);
1550 failed_hidcom_register:
1551         usb_serial_deregister(&cypress_hidcom_device);
1552 failed_em_register:
1553         usb_serial_deregister(&cypress_earthmate_device);
1554
1555         return retval;
1556 }
1557
1558
1559 static void __exit cypress_exit (void)
1560 {
1561         dbg("%s", __FUNCTION__);
1562
1563         usb_deregister (&cypress_driver);
1564         usb_serial_deregister (&cypress_earthmate_device);
1565         usb_serial_deregister (&cypress_hidcom_device);
1566 }
1567
1568
1569 module_init(cypress_init);
1570 module_exit(cypress_exit);
1571
1572 MODULE_AUTHOR( DRIVER_AUTHOR );
1573 MODULE_DESCRIPTION( DRIVER_DESC );
1574 MODULE_VERSION( DRIVER_VERSION );
1575 MODULE_LICENSE("GPL");
1576
1577 module_param(debug, bool, S_IRUGO | S_IWUSR);
1578 MODULE_PARM_DESC(debug, "Debug enabled or not");
1579 module_param(stats, bool, S_IRUGO | S_IWUSR);
1580 MODULE_PARM_DESC(stats, "Enable statistics or not");
1581 module_param(interval, int, S_IRUGO | S_IWUSR);
1582 MODULE_PARM_DESC(interval, "Overrides interrupt interval");