2 # Run this to generate all the initial makefiles, etc.
5 PKG_NAME=${PKG_NAME:-Package}
8 # default version requirements ...
9 REQUIRED_AUTOCONF_VERSION=${REQUIRED_AUTOCONF_VERSION:-2.53}
10 REQUIRED_AUTOMAKE_VERSION=${REQUIRED_AUTOMAKE_VERSION:-1.9}
11 REQUIRED_LIBTOOL_VERSION=${REQUIRED_LIBTOOL_VERSION:-1.5}
12 REQUIRED_GETTEXT_VERSION=${REQUIRED_GETTEXT_VERSION:-0.12}
13 REQUIRED_GLIB_GETTEXT_VERSION=${REQUIRED_GLIB_GETTEXT_VERSION:-2.2.0}
14 REQUIRED_INTLTOOL_VERSION=${REQUIRED_INTLTOOL_VERSION:-0.30}
15 REQUIRED_PKG_CONFIG_VERSION=${REQUIRED_PKG_CONFIG_VERSION:-0.14.0}
16 REQUIRED_GTK_DOC_VERSION=${REQUIRED_GTK_DOC_VERSION:-1.0}
17 REQUIRED_DOC_COMMON_VERSION=${REQUIRED_DOC_COMMON_VERSION:-2.3.0}
18 REQUIRED_GNOME_DOC_UTILS_VERSION=${REQUIRED_GNOME_DOC_UTILS_VERSION:-0.4.2}
20 # a list of required m4 macros. Package can set an initial value
21 REQUIRED_M4MACROS=${REQUIRED_M4MACROS:-}
22 FORBIDDEN_M4MACROS=${FORBIDDEN_M4MACROS:-}
24 # Not all echo versions allow -n, so we check what is possible. This test is
25 # based on the one in autoconf.
38 # some terminal codes ...
39 boldface="`tput bold 2>/dev/null`"
40 normal="`tput sgr0 2>/dev/null`"
42 echo $ECHO_N "$boldface" $ECHO_C
44 echo $ECHO_N "$normal" $ECHO_C
51 # compare_versions MIN_VERSION ACTUAL_VERSION
52 # returns true if ACTUAL_VERSION >= MIN_VERSION
57 IFS="${IFS= }"; ch_save_IFS="$IFS"; IFS="."
58 set $ch_actual_version
59 for ch_min in $ch_min_version; do
60 ch_cur=`echo $1 | sed 's/[^0-9].*$//'`; shift # remove letter suffixes
61 if [ -z "$ch_min" ]; then break; fi
62 if [ -z "$ch_cur" ]; then ch_status=1; break; fi
63 if [ $ch_cur -gt $ch_min ]; then break; fi
64 if [ $ch_cur -lt $ch_min ]; then ch_status=1; break; fi
71 # version_check PACKAGE VARIABLE CHECKPROGS MIN_VERSION SOURCE
72 # checks to see if the package is available
81 vc_checkprog=`eval echo "\\$$vc_variable"`
82 if [ -n "$vc_checkprog" ]; then
83 printbold "using $vc_checkprog for $vc_package"
87 if test "x$vc_package" = "xautomake" -a "x$vc_min_version" = "x1.4"; then
92 printbold "checking for $vc_package $vc_comparator $vc_min_version..."
93 for vc_checkprog in $vc_checkprogs; do
94 echo $ECHO_N " testing $vc_checkprog... " $ECHO_C
95 if $vc_checkprog --version < /dev/null > /dev/null 2>&1; then
96 vc_actual_version=`$vc_checkprog --version | head -n 1 | \
97 sed 's/^.*[ ]\([0-9.]*[a-z]*\).*$/\1/'`
98 if compare_versions $vc_min_version $vc_actual_version; then
99 echo "found $vc_actual_version"
101 eval "$vc_variable=$vc_checkprog; \
102 ${vc_variable}_VERSION=$vc_actual_version"
106 echo "too old (found version $vc_actual_version)"
112 if [ "$vc_status" != 0 ]; then
113 printerr "***Error***: You must have $vc_package $vc_comparator $vc_min_version installed"
114 printerr " to build $PKG_NAME. Download the appropriate package for"
115 printerr " from your distribution or get the source tarball at"
116 printerr " $vc_source"
123 # require_m4macro filename.m4
124 # adds filename.m4 to the list of required macros
126 case "$REQUIRED_M4MACROS" in
127 $1\ * | *\ $1\ * | *\ $1) ;;
128 *) REQUIRED_M4MACROS="$REQUIRED_M4MACROS $1" ;;
133 case "$FORBIDDEN_M4MACROS" in
134 $1\ * | *\ $1\ * | *\ $1) ;;
135 *) FORBIDDEN_M4MACROS="$FORBIDDEN_M4MACROS $1" ;;
140 # add_to_cm_macrodirs dirname
141 # Adds the dir to $cm_macrodirs, if it's not there yet.
142 add_to_cm_macrodirs() {
143 case $cm_macrodirs in
144 "$1 "* | *" $1 "* | *" $1") ;;
145 *) cm_macrodirs="$cm_macrodirs $1";;
150 # print_m4macros_error
151 # Prints an error message saying that autoconf macros were misused
152 print_m4macros_error() {
153 printerr "***Error***: some autoconf macros required to build $PKG_NAME"
154 printerr " were not found in your aclocal path, or some forbidden"
155 printerr " macros were found. Perhaps you need to adjust your"
156 printerr " ACLOCAL_FLAGS?"
162 # Checks that all the requested macro files are in the aclocal macro path
163 # Uses REQUIRED_M4MACROS and ACLOCAL variables.
165 # construct list of macro directories
166 cm_macrodirs=`$ACLOCAL --print-ac-dir`
167 # aclocal also searches a version specific dir, eg. /usr/share/aclocal-1.9
168 # but it contains only Automake's own macros, so we can ignore it.
170 # Read the dirlist file, supported by Automake >= 1.7.
171 if compare_versions 1.7 $AUTOMAKE_VERSION && [ -s $cm_macrodirs/dirlist ]; then
172 cm_dirlist=`sed 's/[ ]*#.*//;/^$/d' $cm_macrodirs/dirlist`
173 if [ -n "$cm_dirlist" ] ; then
174 for cm_dir in $cm_dirlist; do
175 if [ -d $cm_dir ]; then
176 add_to_cm_macrodirs $cm_dir
182 # Parse $ACLOCAL_FLAGS
184 while [ $# -gt 0 ]; do
185 if [ "$1" = "-I" ]; then
186 add_to_cm_macrodirs "$2"
193 if [ -n "$REQUIRED_M4MACROS" ]; then
194 printbold "Checking for required M4 macros..."
195 # check that each macro file is in one of the macro dirs
196 for cm_macro in $REQUIRED_M4MACROS; do
198 for cm_dir in $cm_macrodirs; do
199 if [ -f "$cm_dir/$cm_macro" ]; then
203 # The macro dir in Cygwin environments may contain a file
204 # called dirlist containing other directories to look in.
205 if [ -f "$cm_dir/dirlist" ]; then
206 for cm_otherdir in `cat $cm_dir/dirlist`; do
207 if [ -f "$cm_otherdir/$cm_macro" ]; then
214 if $cm_macrofound; then
217 printerr " $cm_macro not found"
222 if [ "$cm_status" != 0 ]; then
226 if [ -n "$FORBIDDEN_M4MACROS" ]; then
227 printbold "Checking for forbidden M4 macros..."
228 # check that each macro file is in one of the macro dirs
229 for cm_macro in $FORBIDDEN_M4MACROS; do
231 for cm_dir in $cm_macrodirs; do
232 if [ -f "$cm_dir/$cm_macro" ]; then
237 if $cm_macrofound; then
238 printerr " $cm_macro found (should be cleared from macros dir)"
243 if [ "$cm_status" != 0 ]; then
249 # try to catch the case where the macros2/ directory hasn't been cleared out.
250 forbid_m4macro gnome-cxx-check.m4
254 want_glib_gettext=false
256 want_pkg_config=false
258 want_gnome_doc_utils=false
260 configure_files="`find $srcdir -name '{arch}' -prune -o -name '_darcs' -prune -o -name '.??*' -prune -o -name configure.ac -print -o -name configure.in -print`"
261 for configure_ac in $configure_files; do
262 dirname=`dirname $configure_ac`
263 if [ -f $dirname/NO-AUTO-GEN ]; then
264 echo skipping $dirname -- flagged as no auto-gen
267 if grep "^A[CM]_PROG_LIBTOOL" $configure_ac >/dev/null ||
268 grep "^LT_INIT" $configure_ac >/dev/null; then
271 if grep "^AM_GNU_GETTEXT" $configure_ac >/dev/null; then
274 if grep "^AM_GLIB_GNU_GETTEXT" $configure_ac >/dev/null; then
275 want_glib_gettext=true
277 if grep "^AC_PROG_INTLTOOL" $configure_ac >/dev/null ||
278 grep "^IT_PROG_INTLTOOL" $configure_ac >/dev/null; then
281 if grep "^PKG_CHECK_MODULES" $configure_ac >/dev/null; then
284 if grep "^GTK_DOC_CHECK" $configure_ac >/dev/null; then
287 if grep "^GNOME_DOC_INIT" $configure_ac >/dev/null; then
288 want_gnome_doc_utils=true
291 # check to make sure gnome-common macros can be found ...
292 if grep "^GNOME_COMMON_INIT" $configure_ac >/dev/null ||
293 grep "^GNOME_DEBUG_CHECK" $configure_ac >/dev/null ||
294 grep "^GNOME_MAINTAINER_MODE_DEFINES" $configure_ac >/dev/null; then
295 require_m4macro gnome-common.m4
297 if grep "^GNOME_COMPILE_WARNINGS" $configure_ac >/dev/null ||
298 grep "^GNOME_CXX_WARNINGS" $configure_ac >/dev/null; then
299 require_m4macro gnome-compiler-flags.m4
305 #tell Mandrake autoconf wrapper we want autoconf 2.5x, not 2.13
307 export WANT_AUTOCONF_2_5
308 version_check autoconf AUTOCONF 'autoconf2.50 autoconf autoconf-2.53' $REQUIRED_AUTOCONF_VERSION \
309 "http://ftp.gnu.org/pub/gnu/autoconf/autoconf-$REQUIRED_AUTOCONF_VERSION.tar.gz" || DIE=1
310 AUTOHEADER=`echo $AUTOCONF | sed s/autoconf/autoheader/`
312 case $REQUIRED_AUTOMAKE_VERSION in
313 1.4*) automake_progs="automake-1.4" ;;
314 1.5*) automake_progs="automake-1.11 automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6 automake-1.5" ;;
315 1.6*) automake_progs="automake-1.11 automake-1.10 automake-1.9 automake-1.8 automake-1.7 automake-1.6" ;;
316 1.7*) automake_progs="automake-1.11 automake-1.10 automake-1.9 automake-1.8 automake-1.7" ;;
317 1.8*) automake_progs="automake-1.11 automake-1.10 automake-1.9 automake-1.8" ;;
318 1.9*) automake_progs="automake-1.11 automake-1.10 automake-1.9" ;;
319 1.10*) automake_progs="automake-1.11 automake-1.10" ;;
320 1.11*) automake_progs="automake-1.11" ;;
322 version_check automake AUTOMAKE "$automake_progs" $REQUIRED_AUTOMAKE_VERSION \
323 "http://ftp.gnu.org/pub/gnu/automake/automake-$REQUIRED_AUTOMAKE_VERSION.tar.gz" || DIE=1
324 ACLOCAL=`echo $AUTOMAKE | sed s/automake/aclocal/`
326 if $want_libtool; then
327 version_check libtool LIBTOOLIZE libtoolize $REQUIRED_LIBTOOL_VERSION \
328 "http://ftp.gnu.org/pub/gnu/libtool/libtool-$REQUIRED_LIBTOOL_VERSION.tar.gz" || DIE=1
329 require_m4macro libtool.m4
332 if $want_gettext; then
333 version_check gettext GETTEXTIZE gettextize $REQUIRED_GETTEXT_VERSION \
334 "http://ftp.gnu.org/pub/gnu/gettext/gettext-$REQUIRED_GETTEXT_VERSION.tar.gz" || DIE=1
335 require_m4macro gettext.m4
338 if $want_glib_gettext; then
339 version_check glib-gettext GLIB_GETTEXTIZE glib-gettextize $REQUIRED_GLIB_GETTEXT_VERSION \
340 "ftp://ftp.gtk.org/pub/gtk/v2.2/glib-$REQUIRED_GLIB_GETTEXT_VERSION.tar.gz" || DIE=1
341 require_m4macro glib-gettext.m4
344 if $want_intltool; then
345 version_check intltool INTLTOOLIZE intltoolize $REQUIRED_INTLTOOL_VERSION \
346 "http://ftp.gnome.org/pub/GNOME/sources/intltool/" || DIE=1
347 require_m4macro intltool.m4
350 if $want_pkg_config; then
351 version_check pkg-config PKG_CONFIG pkg-config $REQUIRED_PKG_CONFIG_VERSION \
352 "'http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-$REQUIRED_PKG_CONFIG_VERSION.tar.gz" || DIE=1
353 require_m4macro pkg.m4
356 if $want_gtk_doc; then
357 version_check gtk-doc GTKDOCIZE gtkdocize $REQUIRED_GTK_DOC_VERSION \
358 "http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/" || DIE=1
359 require_m4macro gtk-doc.m4
362 if $want_gnome_doc_utils; then
363 version_check gnome-doc-utils GNOME_DOC_PREPARE gnome-doc-prepare $REQUIRED_GNOME_DOC_UTILS_VERSION \
364 "http://ftp.gnome.org/pub/GNOME/sources/gnome-doc-utils/" || DIE=1
367 if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
368 version_check gnome-common DOC_COMMON gnome-doc-common \
369 $REQUIRED_DOC_COMMON_VERSION " " || DIE=1
372 check_m4macros || DIE=1
374 if [ "$DIE" -eq 1 ]; then
378 if [ "$#" = 0 -a "x$NOCONFIGURE" = "x" ]; then
379 printerr "**Warning**: I am going to run \`configure' with no arguments."
380 printerr "If you wish to pass any to it, please specify them on the"
381 printerr \`$0\'" command line."
386 for configure_ac in $configure_files; do
387 dirname=`dirname $configure_ac`
388 basename=`basename $configure_ac`
389 if [ -f $dirname/NO-AUTO-GEN ]; then
390 echo skipping $dirname -- flagged as no auto-gen
391 elif [ ! -w $dirname ]; then
392 echo skipping $dirname -- directory is read only
394 printbold "Processing $configure_ac"
397 # Note that the order these tools are called should match what
398 # autoconf's "autoupdate" package does. See bug 138584 for
401 # programs that might install new macros get run before aclocal
402 if grep "^A[CM]_PROG_LIBTOOL" $basename >/dev/null ||
403 grep "^LT_INIT" $basename >/dev/null; then
404 printbold "Running $LIBTOOLIZE..."
405 $LIBTOOLIZE --force --copy || exit 1
408 if grep "^AM_GLIB_GNU_GETTEXT" $basename >/dev/null; then
409 printbold "Running $GLIB_GETTEXTIZE... Ignore non-fatal messages."
410 echo "no" | $GLIB_GETTEXTIZE --force --copy || exit 1
411 elif grep "^AM_GNU_GETTEXT" $basename >/dev/null; then
412 if grep "^AM_GNU_GETTEXT_VERSION" $basename > /dev/null; then
413 printbold "Running autopoint..."
414 autopoint --force || exit 1
416 printbold "Running $GETTEXTIZE... Ignore non-fatal messages."
417 echo "no" | $GETTEXTIZE --force --copy || exit 1
421 if grep "^AC_PROG_INTLTOOL" $basename >/dev/null ||
422 grep "^IT_PROG_INTLTOOL" $basename >/dev/null; then
423 printbold "Running $INTLTOOLIZE..."
424 $INTLTOOLIZE --force --copy --automake || exit 1
426 if grep "^GTK_DOC_CHECK" $basename >/dev/null; then
427 printbold "Running $GTKDOCIZE..."
428 $GTKDOCIZE --copy || exit 1
431 if [ "x$USE_COMMON_DOC_BUILD" = "xyes" ]; then
432 printbold "Running gnome-doc-common..."
433 gnome-doc-common --copy || exit 1
435 if grep "^GNOME_DOC_INIT" $basename >/dev/null; then
436 printbold "Running $GNOME_DOC_PREPARE..."
437 $GNOME_DOC_PREPARE --force --copy || exit 1
440 # Now run aclocal to pull in any additional macros needed
442 # if the AC_CONFIG_MACRO_DIR() macro is used, pass that
443 # directory to aclocal.
444 m4dir=`cat "$basename" | grep '^AC_CONFIG_MACRO_DIR' | sed -n -e 's/AC_CONFIG_MACRO_DIR(\([^()]*\))/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q`
445 if [ -n "$m4dir" ]; then
448 printbold "Running $ACLOCAL..."
449 $ACLOCAL $m4dir $ACLOCAL_FLAGS || exit 1
451 if grep "GNOME_AUTOGEN_OBSOLETE" aclocal.m4 >/dev/null; then
452 printerr "*** obsolete gnome macros were used in $configure_ac"
455 # Now that all the macros are sorted, run autoconf and autoheader ...
456 printbold "Running $AUTOCONF..."
458 if grep "^A[CM]_CONFIG_HEADER" $basename >/dev/null; then
459 printbold "Running $AUTOHEADER..."
460 $AUTOHEADER || exit 1
461 # this prevents automake from thinking config.h.in is out of
462 # date, since autoheader doesn't touch the file if it doesn't
464 test -f config.h.in && touch config.h.in
467 # Finally, run automake to create the makefiles ...
468 printbold "Running $AUTOMAKE..."
469 if [ -f COPYING ]; then
470 cp -pf COPYING COPYING.autogen_bak
472 if [ -f INSTALL ]; then
473 cp -pf INSTALL INSTALL.autogen_bak
475 if [ $REQUIRED_AUTOMAKE_VERSION != 1.4 ]; then
476 $AUTOMAKE --gnu --add-missing --force --copy || exit 1
478 $AUTOMAKE --gnu --add-missing --copy || exit 1
480 if [ -f COPYING.autogen_bak ]; then
481 cmp COPYING COPYING.autogen_bak > /dev/null || cp -pf COPYING.autogen_bak COPYING
482 rm -f COPYING.autogen_bak
484 if [ -f INSTALL.autogen_bak ]; then
485 cmp INSTALL INSTALL.autogen_bak > /dev/null || cp -pf INSTALL.autogen_bak INSTALL
486 rm -f INSTALL.autogen_bak
493 conf_flags="--enable-maintainer-mode"
495 if test x$NOCONFIGURE = x; then
496 printbold Running $srcdir/configure $conf_flags "$@" ...
497 $srcdir/configure $conf_flags "$@" \
498 && echo Now type \`make\' to compile $PKG_NAME || exit 1
500 echo Skipping configure process.